LED Headlights Pair w/ LED Module for GMC Yukon / Yukon XL AT4 Elevation (2025-2026)

Replace damaged headlights on your 2025-2026 Yukon or Yukon XL AT4 or Elevation with this brand-new LED pair with LED module.

Fitment

Will NOT fit: Denali and Denali Ultimate; 2021-2024 Yukon.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, turn: built-in LED
• LED module: included
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 85812521, 85842701, 85674299, 85717358, 85765593, 85788510, 86586463, 85674298, 85717357, 85765592, 85788509, 86586462. Partslink: 85812521, 85812520.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• LED module included

Installation

1. Disconnect the battery. Remove the grille push pins and T15 screws along the upper close-out panel.
2. Remove the 7 mm fender-to-fascia bolts in each wheel well and the lower bumper bolts.
3. Unclip the front fascia, unplug the parking sensors and camera, and set the fascia aside.
4. Remove the 10 mm headlamp bolts, unplug the lamp, install the new one and reverse; aim the headlights.

Steps compiled from Go-Parts 2021+ Tahoe/Suburban headlight replacement guide; GM 2021+ T1 SUV platform shared by Yukon. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Denali?
No. AT4 and Elevation only.

Will these fit a 2024 Yukon?
No. The 2025 refresh uses different lamps.

Do I need to remove the front bumper to replace these headlights?
Yes, the front fascia has to come off to reach the lamp bolts; plan 1-2 hours.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.