LED Projector Headlights Pair w/ Module & Bulbs for Chevy Blazer (2019-2022)

Replace damaged LED headlights on your 2019-2022 Chevrolet Blazer with this brand-new LED projector pair with module and bulbs.

Fitment

Will NOT fit: HID Blazer; 2023+ Blazer.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam: LED
• Turn signal: 7440
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84987045. Partslink: .

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• LED module and bulbs included

Installation

1. Remove the two fascia bolts and four retainers on each side and the retainers along the top and bottom of the fascia.
2. Release the fascia tabs at both headlamps with a nylon wedge, remove the grille bolts and clips and the shutter bolts; unplug the shutter and fascia connectors.
3. Remove the headlamp bolts, unplug the harness and retainers and lift the lamp out.
4. Install the new lamp, reverse assembly and aim the headlights.

Steps compiled from GM/Mitchell 2019 Blazer front fascia and headlamp replacement procedure. Professional installation and headlight aiming are recommended.

FAQs

What bulbs does it use?
Per the listing: LED low/high beam and a 7440 turn signal.

Will these fit a Blazer with HID headlights?
No.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2019-2022 Blazer the front bumper cover has to come off to reach the headlamp mounting bolts.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.