LED Projector Headlights Pair with LED DRL for Toyota Corolla L / LE Sedan (2020-2022)
$301.95
Passer aux informations sur le produit
LED Projector Headlights Pair with LED DRL for Toyota Corolla L / LE Sedan (2020-2022)
$301.95
DS-8115002S30
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2020-2022 Toyota Corolla L and LE sedan with the 1.8L gas engine and factory LED projector headlights. They will not fit the SE, XSE, XLE, Nightshade, Apex or Hybrid sedans, the Corolla Hatchback, or the 2023 and newer refreshed Corolla, which use different lamps. Bulbs and sockets come installed.
Make your Corolla L or LE look sharp again. This pair replaces hazy, cracked or damaged 2020-2022 L / LE headlights with clear lenses, an LED projector and the slim LED running light that defines this generation. Everything is installed, and each lamp plugs into the factory connector with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2020-2022 | Toyota Corolla | L and LE sedan, 1.8L gas, with factory LED projector headlights and LED DRL. Not SE, XSE, XLE, Hybrid or hatchback. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker
- Low and high beam: LED projector (installed)
- Daytime running light: LED
- Color temperature: about 5000K (cool white)
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side LED headlight assembly
- Passenger-side LED headlight assembly
- Bulbs and sockets (pre-installed)
Interchange References
Replaces the original assemblies commonly crossed with 81150-02S30, 81110-02S30, 81070-02S30, 81140-02S30, TO2502286, TO2503286.
Installation: Toyota Corolla L / LE Sedan (2020-2022)
On the 2020-2022 Corolla sedan the headlight is held behind the front bumper cover, so the cover must come off. Use tape to protect the paint and have a helper. Turn the car and lights off and disconnect the 12-volt battery first.
- Tape the painted edges. Remove the upper radiator cover, the wheel-liner fasteners and the fasteners under the bumper.
- Release the bumper corners, unplug the bumper wiring and remove the cover with a helper.
- Tape around the headlight, then remove its one bolt and three screws.
- Release the lamp guide and clamps, disconnect the connectors and lift the old assembly away.
- Fit the new lamp, restore the bumper wiring, cover and fasteners, reconnect the battery, test every light and have the beam aim checked.
Frequently Asked Questions
Which vehicles do these headlights fit?
2020-2022 Toyota Corolla L and LE sedans with the 1.8L gas engine. They do not fit the SE, XSE, XLE, Hybrid, hatchback or 2023+ Corolla. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
My car is a Corolla SE. Will these fit?
No. The SE, XSE and XLE use a different full LED headlight. We carry that lamp as a separate product.
Are bulbs included?
Yes. All light sources come installed.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2020-2022 Toyota Corolla L / LE?
Remove the front bumper cover, then the headlight's one bolt and three screws. Unplug it, plug in the new lamp, refit the bumper and check the aim. No bulbs to move; everything is installed.