GENSSI hero — light smoke tail lights pair for Dodge Dakota (2005-2011) on white

Light Smoke Tail Lights Pair for Dodge Dakota (2005-2011)

$134.95
Passer aux informations sur le produit
GENSSI hero — light smoke tail lights pair for Dodge Dakota (2005-2011) on white

Light Smoke Tail Lights Pair for Dodge Dakota (2005-2011)

$134.95
DS-DAKOTA-TAIL-SMOKE-PAIR-2005-2011

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A bright red lens leaves a second-gen Dakota looking plain from behind, and this light smoke pair darkens that corner while the brake still reads through the lens at night. GENSSI's set is a left and right assembly for the 2005-2011 Dakota, not the 1997-2004 lamp, and the factory sockets twist in with no splicing.

Important Fitment Note: 2005-2011 Dakota only. A 1997-2004 Dakota uses a different lamp.

Fitment

YEAR MAKE / MODEL FITS
2005-2011 Dodge / Dakota Yes
1997-2004 Dodge / Dakota No

Specs

  • Style: Black chrome housing with a light smoke lens over two round chambers
  • Bulbs: Incandescent. Bulbs and sockets are not in the box. Brake and turn use a red 3157. Reverse uses a clear 3157
  • Sold as: Pair — left and right light smoke tail lights. Bulbs and sockets are not included
  • Fit: Direct replacement for the 2005-2011 Dodge Dakota. Factory sockets, no splicing

Interchange

55077605AC, 55077605AD, 55077604AC, 55077604AD

What's included

  • 1x Driver (left) light smoke tail light
  • 1x Passenger (right) light smoke tail light

Installation — Dodge Dakota (2005-2011)

  1. Lower the tailgate. The tool is a T25 Torx bit.
  2. Remove the two T25 screws on the inner edge of the lamp, beside the open tailgate.
  3. Pull the housing straight back. Two locking tabs on the outer edge hold it. Support the lamp. Do not hang it from the wires.
  4. Twist the brake socket and the reverse socket counterclockwise and pull them out. The sockets and bulbs are not in the box.
  5. Brake and turn use a red 3157. Reverse uses a clear 3157. Keep the factory bulbs in those sockets.
  6. Lock the sockets into the matching chambers. Line the outer tabs up and push the lamp in until they seat.
  7. Reinstall the two T25 screws snug. Check park, brake, both turn signals, and reverse, then repeat on the other side.

Buyer FAQ

Does a 2003 Dakota fit? No. This pair is the 2005-2011 lamp. A 1997-2004 Dakota uses a different housing.

Are the bulbs included? No. Move the factory sockets. Brake and turn use a red 3157. Reverse uses a clear 3157.

Which part numbers does this replace? Left replaces 55077605AC and 55077605AD. Right replaces 55077604AC and 55077604AD.

Vous aimerez peut-être aussi