Light Smoke Tail Lights Pair for Jeep Commander (2006-2010)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A tired red lens leaves a Commander looking plain from behind, and this light smoke pair darkens that squared-off rear by day while a red brake bulb still reads clearly when the pedal goes down. GENSSI's set is a left and right housing for the 2006-2010 Commander, not a Liberty lamp and not the red-and-clear kit, and the factory sockets go in with no splicing.
Important Fitment Note: Jeep Commander XK only. This is the light smoke lens. The red-and-clear pair and the all-clear pair are different lenses. Brake color comes from the bulb, so use red brake bulbs. The 2002-2012 Liberty uses a different housing.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2006-2010 | Jeep / Commander, all trims | Yes |
| 2002-2012 | Jeep / Liberty | No |
Specs
- Style: Black chrome housing with a light smoke lens
- Bulbs: Incandescent. Bulbs and sockets are not in the box. Stop, tail, and turn use a 3057. Reverse is a 3157 on 2006-2008 Commanders and a 3057 on 2009-2010. The side marker is a 194. Use red brake bulbs with this smoke lens
- Sold as: Pair — left and right light smoke tail light assemblies. Bulbs and sockets are not included
- Fit: Direct replacement for every 2006-2010 Jeep Commander trim, including Sport, Limited, 65th Anniversary, and Overland. Factory sockets, no splicing
Interchange
55396459AE, 55396459AF, 55396459AH, 55396458AE, 55396458AF, 55396458AH
What's included
- 1x Driver (left) light smoke tail light
- 1x Passenger (right) light smoke tail light
Installation — Jeep Commander XK (2006-2010)
- Raise the liftgate. On the inner edge of the lamp, beside the liftgate opening, pry out the two push-pin retainers with a flat screwdriver or a plastic trim tool.
- Pull the outboard edge of the lamp straight rearward until the two ball studs pop out of the plastic grommets in the quarter panel. Pull evenly and support the housing. Do not hang it from the wires.
- Twist each socket a quarter turn counterclockwise and pull it out. This housing has a reverse socket, a park and stop socket, a turn socket, and a side-marker socket. The sockets are not in the box.
- Use a red brake bulb in the park and stop socket. Stop, tail, and turn are a 3057. Reverse is a 3157 on a 2006-2008 Commander and a 3057 on a 2009-2010. The side marker is a 194. A clear factory bulb behind this smoke lens will not read as a red brake.
- Lock those sockets into the new housing. Line the two ball studs up with the grommets and push the lamp on until both studs seat. Press the two push-pin retainers back into the inner edge.
- Check parking, brake, both turn signals, and reverse before you close the liftgate. Repeat on the other side.
Buyer FAQ
Is this the red and clear Commander pair? No. These are light smoke lenses in black chrome housings. The red-and-clear pair and the all-clear pair are separate kits.
Can I move the factory bulbs over? Move the sockets. Put a red bulb in the brake socket. A clear factory bulb behind this smoke lens will not show a red brake.
Which Jeeps fit? Every 2006-2010 Commander, including Sport, Limited, 65th Anniversary, and Overland. Left replaces 55396459AH. Right replaces 55396458AH. The Liberty does not use this lamp.