Non-Projector LED Headlights Pair for VW Jetta (2019-2024)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace damaged LED headlights on your 2019-2024 Volkswagen Jetta S/SE with this brand-new non-projector LED pair.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2019-2024 | Volkswagen Jetta S / SE / R-Line (factory LED non-projector) | Factory LED headlights |
Will NOT fit: Jetta with LED projector headlights (SEL/GLI).
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, side marker: LED
- Turn signal: PWY24W
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 17A941035E, 17A941036E. Partslink: VW2502174, VW2503174.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- LED module included
Installation
- Disconnect the battery. Turn the wheels, remove the three T25 wheel-liner screws and the upward T25 bumper-to-fender screw on each side.
- Remove the four T25 screws on top of the grille, then the T25 screws under the bumper corners and center.
- Pull evenly at the fender seam to release the side clips, unclip the center latches, and unplug fog lights and ACC/front-assist sensors before lifting the bumper off.
- Remove the headlamp T30 bolts, unplug the lamp, install the new one flush with the fender and with its bottom slots on the bumper tabs; refit and aim.
Steps compiled from VWVortex "MK7 Jetta front bumper removal how-to" and CJM Industries MK7 Jetta bumper removal guide. Professional installation and headlight aiming are recommended.
FAQs
What bulbs does it use?
Per the listing image: LED low/high beam, DRL and side marker; PWY24W turn signal.
Will these fit a Jetta GLI?
No. GLI uses projector headlights.
Do I need to remove the front bumper to replace these headlights?
Yes. On the 2019-2024 MK7 Jetta the front bumper cover has to come off to reach the headlamp mounting bolts.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.