Red and Clear Halogen Tail Lights Pair for Chevy Express / GMC Savana 1500 2500 3500 (1996-2002)
$120.95
Passer aux informations sur le produit
Red and Clear Halogen Tail Lights Pair for Chevy Express / GMC Savana 1500 2500 3500 (1996-2002)
$120.95
DS-GM1092167
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Chevrolet Express 1500, 2500, and 3500 (1996-2002) and GMC Savana 1500, 2500, and 3500 (1996-2002) only. They will not fit 2003-up Express or Savana. Compare your current housings with our photos before ordering.
Replace worn first-generation van tails with this red and clear halogen pair. You get driver and passenger assemblies in a chrome housing, with stacked red tail and brake lenses and a clear reverse section. Reuse your existing halogen bulbs — bulbs are not included. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1996-2002 | Chevrolet Express 1500 | Red and clear halogen housing. Not 2003-up |
| 1996-2002 | Chevrolet Express 2500 | Same housing |
| 1996-2002 | Chevrolet Express 3500 | Same housing |
| 1996-2002 | GMC Savana 1500 | Same housing |
| 1996-2002 | GMC Savana 2500 | Same housing |
| 1996-2002 | GMC Savana 3500 | Same housing |
Specs
- Sold as: a driver and passenger pair
- Style: chrome housing, red and clear lens
- Lighting: halogen tail, brake, turn, and reverse; bulbs not included
- DOT certified
- 12 V
- New aftermarket assemblies
- OEM cross-reference: GM1092167, GM1092168, 19153084, 19153085
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
Installation
- Open the rear doors so you can reach the screws or nuts behind each quarter-panel lamp.
- Remove the fasteners that hold the assembly to the van.
- Pull the housing straight back out of the opening, then unplug the factory connector and twist out the bulb sockets.
- Transfer the bulbs and sockets into the new housing, seat it on the factory mounting points, reconnect, and tighten the fasteners.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the doors.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.