Red Clear LED Tail Lights Pair for Porsche Boxster (1997-2004)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
The amber turn lens on a 986 Boxster dates the rear, and this red and clear pair keeps the turn clear while the brake hits through a row of LEDs. GENSSI's pair is the 1997-2004 Boxster and Boxster S lamp, and the factory harness plugs in once the bulb panel transfers.
Important Fitment Note: 986 Boxster and Boxster S only. A 2005-2012 Boxster is a 987 and uses a different housing. This is the Euro lens, so the side parking bulb comes out and stays out. The factory bulb panel and the remaining bulbs transfer. New gaskets are in the box.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1997-2004 | Porsche / Boxster | Yes |
| 2000-2004 | Porsche / Boxster S | Yes |
| 2005-2012 | Porsche / Boxster and Cayman | No |
Specs
- Style: Clear upper lens with a red lower lens and round LED brake and rear-fog elements
- Bulbs: LED brake and rear fog. The turn, reverse, and parking bulbs transfer from the factory carrier. The side parking bulb comes out and stays out
- Sold as: Pair — left and right red and clear LED tail lights, with gaskets. Bulbs and the bulb panel transfer from the car
- Fit: 1997-2004 Porsche Boxster and Boxster S. The factory harness plugs in after the bulb panel transfers
Interchange
98663144303, 98663144403
What's included
- 1x Driver red and clear LED tail light
- 1x Passenger red and clear LED tail light
- 2x Gaskets
Installation — Porsche Boxster (1997-2004)
- Confirm a 986 Boxster or Boxster S, 1997 through 2004. A 987 uses a different lamp.
- Open the rear trunk. Pull aside the small carpet panel over the back of the tail lamp. Plastic screw fasteners hold that panel.
- The lamp is held by 8mm nuts. Pelican's 986 procedure shows four of them. Hold the lens from outside so it cannot drop onto the bumper, then remove the nuts.
- Work the lamp out rearward and unplug the harness. Press the lock tab and pull the bulb carrier off the old lens.
- Move the turn, reverse, and parking bulbs with that carrier. Leave the side parking bulb out. This Euro lens does not use it.
- The new gaskets are in the box. Set the lamp in the opening and line the body gap up before the nuts go tight. Snug them in a cross pattern. Do not finish one nut first.
- Plug the harness in, clip it to the back of the lamp, and check brake, both turns, and reverse. Repeat on the other side.
Buyer FAQ
Does a 2005 Boxster fit? No. 2005 starts the 987, and that car uses a different housing. This pair replaces 98663144303 and 98663144403.
Are the bulbs in the box? No. The factory bulb panel and its bulbs transfer. The side parking bulb comes out and stays out.
What changes at night? The brake and rear fog run on the LED section. The turn and reverse still use the bulbs from the car.