Red and Clear Tail Lights Pair for Jeep Commander (2006-2010)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Faded red corners make a Commander look tired from a car length back, and this red and clear pair puts a bright corner lens on that squared-off rear while the red brake sections stay easy to read at night. GENSSI's set is a left and right housing for the 2006-2010 Commander, not a Liberty lamp and not the all-clear kit, and it goes on with the factory sockets.
Important Fitment Note: Jeep Commander XK only. This is the red and clear lens. The all-clear Commander kit is a different lamp, and the 2002-2012 Liberty uses a different housing.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2006-2010 | Jeep / Commander, all trims | Yes |
| 2002-2012 | Jeep / Liberty | No |
Specs
- Style: Black housing with a red brake lens and a clear corner lens
- Bulbs: Incandescent. Bulbs and sockets are not in the box. Move the factory sockets. Each lamp uses the original reverse, brake, turn, and side-marker bulbs
- Sold as: Pair — left and right tail light assemblies. Bulbs and sockets are not included
- Fit: Direct replacement for every 2006-2010 Jeep Commander trim, including Sport, Limited, 65th Anniversary, and Overland. Factory sockets, no splicing
Interchange
55396459AE, 55396459AF, 55396459AH, 55396458AE, 55396458AF, 55396458AH
What's included
- 1x Driver (left) red and clear tail light
- 1x Passenger (right) red and clear tail light
Installation — Jeep Commander XK (2006-2010)
- Raise the liftgate. On the inner edge of the lamp, beside the liftgate opening, pry out the two push-pin retainers with a flat screwdriver or a plastic trim tool.
- Pull the outboard edge of the lamp straight rearward until the two ball studs pop out of the plastic grommets in the quarter panel. Pull evenly and support the housing. Do not hang it from the wires.
- Twist each socket a quarter turn counterclockwise and pull it out. This housing has a reverse socket, a park and stop socket, a turn socket, and a side-marker socket. The sockets are not in the box.
- Lock those same sockets into the new housing. Keep the original bulbs in the sockets.
- Line the two ball studs up with the grommets and push the lamp on until both studs seat. Press the two push-pin retainers back into the inner edge.
- Check parking, brake, both turn signals, and reverse before you close the liftgate. Repeat on the other side.
Buyer FAQ
Is this the all-clear Commander kit? No. These are the red and clear lenses in chrome housings, the factory-style look. The all-clear pair is a separate kit.
Are the bulbs in the box? No. Move the factory sockets and bulbs across. Nothing is spliced.
Which Jeeps fit? Every 2006-2010 Commander, including Sport, Limited, 65th Anniversary, and Overland. Left replaces 55396459AH. Right replaces 55396458AH. The Liberty does not use this lamp.