GENSSI hero — red and clear tail lights pair for Toyota Pickup (1989-1995) on white

Red Clear Tail Lights Pair for Toyota Pickup (1989-1995)

$129.95
Passer aux informations sur le produit
GENSSI hero — red and clear tail lights pair for Toyota Pickup (1989-1995) on white

Red Clear Tail Lights Pair for Toyota Pickup (1989-1995)

$129.95
DS-PICKUP-TAIL-RED-CLEAR-PAIR-1989-1995

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

An amber turn section leaves a 1989-1995 Toyota Pickup looking stock on the bed corner, and this red and clear pair keeps the brake red while the turn and reverse read through a clear lens. GENSSI's set is the wider lamp for that Pickup, and the factory plug connects with no splicing.

Important Fitment Note: 1989-1995 Pickup only. This is the wider lamp on the flat bed corner. A 1984-1988 Pickup uses the slimmer lamp that follows the curve in the bed. A Tacoma does not use this lamp.

Fitment

YEAR MAKE / MODEL FITS
1989-1995 Toyota / Pickup Yes
1984-1988 Toyota / Pickup No
1995-2004 Toyota / Tacoma No

Specs

  • Style: Chrome housing with a red brake lens and a clear turn and reverse lens
  • Bulbs: Incandescent. Six clear bulbs and two amber bulbs are in the box. Park and brake use a 1157. The turn and reverse each use a 1156
  • Sold as: Pair — left and right red and clear tail lights, with six clear bulbs and two amber bulbs
  • Fit: 1989-1995 Toyota Pickup, 2WD and 4WD, standard cab and extended cab. Factory plug

Interchange

81560-89166, 81550-89166, TO2800105, TO2801105

What's included

  • 1x Driver (left) red and clear tail light
  • 1x Passenger (right) red and clear tail light
  • 6x Clear bulbs
  • 2x Amber bulbs

Installation — Toyota Pickup (1989-1995)

  1. Confirm the wider lamp on a flat bed corner. A 1984-1988 Pickup uses the slimmer curved lamp. A Tacoma uses a different housing.
  2. The housing is held by four screws, one at each corner of the back. Use a Phillips screwdriver.
  3. Remove the four screws. Unplug the connector and pull the lamp off the bedside. Do not hang it from the wires.
  4. Park and brake use the 1157. The turn uses a 1156, and reverse uses a 1156. Six clear bulbs and two amber bulbs are in the box.
  5. Seat those bulbs in the sockets on the back of the new housing.
  6. Plug the connector in, set the lamp on the bed corner, and snug the four screws. Do not overtighten the plastic.
  7. Check park, brake, both turn signals, and reverse, then repeat on the other side.

Buyer FAQ

Does a 1988 Pickup fit? No. A 1984-1988 Pickup uses the slimmer lamp that follows the curve in the bed. This pair is the wider 1989-1995 lamp.

Does a 1995 Tacoma fit? No. This pair is the Toyota Pickup. A Tacoma uses a different housing.

Which part numbers does this replace? Left replaces 81560-89166. Right replaces 81550-89166.

Vous aimerez peut-être aussi