RGB LED Headlights Pair for Mitsubishi Lancer (2008-2017) / Evolution X (2008-2015)

The 2008-2017 Lancer and Evolution X already have an aggressive front. This RGB LED pair leans into that — a chevron DRL you can set to color, a start-up animation, and a sequential turn signal in a black housing.

Features

• RGB chevron DRL with sequential turn signals. High and low white LED beams, a color-changing RGB DRL, start-up animation, and sequential turn signals are built into the pair, as shown in the photos. Rated draw is 45-70W on a 12V system.
• Built for 2008-2017 Lancer and 2008-2015 Evolution X. The housing follows the CY/CZ Lancer and Evo X opening. It does not fit 2002-2007 Lancer.
• Black housings with clear lenses. The pair uses a sealed assembly with DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory Lancer or Evo X headlights have dulled, and the front no longer feels as sharp as the rest of the car.
• You want a color-changing chevron DRL and a sequential turn signal in the 2008-2017 opening.
• You are building a Lancer or Evolution X and want the front lighting to match the rest of the work.
• You confirmed your car is a 2008-2017 Lancer or 2008-2015 Evolution X, not an earlier Lancer.

Why Drivers Love This LED Pair

• The RGB chevron and sequential turn signal give the Lancer and Evo X a look the factory lamps never had.
• The housing is shaped for the 2008-2017 Lancer and Evo X opening, so the pair sits flush.
• We ship a matched pair with high beam, low beam, DRL, and turn signals in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2008-2017 Mitsubishi Lancer and 2008-2015 Lancer Evolution X (does not fit 2002-2007)
• Lighting: Full LED with RGB DRL, start-up animation, and sequential turn signals
• Functions: RGB DRL, sequential turn signal, high beam, low beam, start-up animation
• Power: 45-70W on a 12V system
• Housing / lens: Black housing, clear lens
• Certifications: DOT, ISO, SAE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2008-2017 Mitsubishi Lancer and Evolution X

The front bumper cover has to come off. Disconnect the battery. Remove the upper radiator-cover pins and the top bumper bolts, then the wheel-well screws and the underside fasteners. Pull the bumper corners off the fender clips and lift the cover away. Unbolt each headlight, pull the assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, the RGB DRL, and the sequential turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit a Lancer Evolution X?
Yes. This pair fits 2008-2015 Lancer Evolution X as well as 2008-2017 Lancer.

Will this fit a 2002-2007 Lancer?
No. Those years use a different headlight and front end.

What does the RGB lighting do?
The chevron DRL can be set to color-changing RGB lighting, with a start-up animation and sequential turn signals as shown in the photos. High and low beams remain white LED.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts on the 2008-2017 Lancer and Evolution X.

What warranty do we include?
These headlights are covered by a 1-year warranty.