Smoke bumper turn signal pair for a BMW E30

Smoke Bumper Turn Signals for BMW 3 Series E30 (1988-1991)

$96.95
Passer aux informations sur le produit
Smoke bumper turn signal pair for a BMW E30

Smoke Bumper Turn Signals for BMW 3 Series E30 (1988-1991)

$96.95
DS-E30-SIGNAL-SMOKE-1988-1991

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The amber E30 bumper signal goes smoke, and the included 1156 still flashes from the factory plug. GENSSI supplies the left and right lamps for the 1988-1991 plastic bumper, except the M3.

Important Fitment Note: Each housing has one mounting hole in each side tab and bolts to the single-hole bracket. It does not fit the dual-hole bracket, the chrome diving-board bumper, or the E30 M3. A US-spec car with the three-prong bumper plug uses that factory plug on the new lamp.

Fitment

YEAR MAKE / MODEL FITS
1988-1991 BMW 3 Series E30 plastic bumper, sedan, coupe, and convertible Yes
1988-1991 BMW M3 E30 No
1984-1987 BMW 3 Series E30 chrome diving-board bumper No

Specs

  • Style: Smoke lens bumper turn signal, left and right, with one mounting hole in each side tab
  • Bulbs: 1156 amber. Two bulbs are in the box
  • Sold as: Pair of smoke bumper turn signals with two amber 1156 bulbs
  • Fit: 1988-1991 BMW E30 sedan, coupe, and convertible with the plastic bumper and the single-hole bracket. Not the M3 and not the chrome diving-board bumper

Interchange

63131380965, 63131380966

What's included

  • 1x Driver bumper turn signal
  • 1x Passenger bumper turn signal
  • 2x 1156 amber bulbs

Installation — 1988-1991 BMW 3 Series E30

  1. The turn signal is bolted to the plastic bumper from behind.
  2. From under the bumper, just inboard of each turn signal, remove the two T55 Torx bolts. Slide the bumper forward only far enough to reach the plugs.
  3. Squeeze the two locking tabs on the factory plug and pull it off the lamp.
  4. Remove the screws that hold the turn signal to the bumper. The left and right housings are different.
  5. Set the smoke lamp on the single-hole bracket and fit one included 1156 amber bulb. Connect the factory plug. A three-prong US plug moves from the old lamp onto the new one.
  6. Slide the bumper back onto the side brackets, start both T55 bolts by hand, and tighten them.
  7. Check the turn signal, then repeat on the other side.

Buyer FAQ

Does the M3 use this pair? No. The E30 M3 bumper uses a different signal. This pair is the non-M plastic bumper.

Will this bolt to a dual-hole bracket? No. These housings have one hole in each side tab. The dual-hole bracket is a different lamp.

Are the bulbs in the box? Yes. Two amber 1156 bulbs come with the pair.

Vous aimerez peut-être aussi