Smoke C-Shape LED Tail Lights Pair for Chevy Suburban Tahoe / GMC Yukon Yukon XL (2000-2006)
$128.95
Passer aux informations sur le produit
Smoke C-Shape LED Tail Lights Pair for Chevy Suburban Tahoe / GMC Yukon Yukon XL (2000-2006)
$128.95
DS-19168990-LED
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Chevrolet Suburban 1500 and 2500, Tahoe, GMC Yukon, and Yukon XL 1500 and 2500 (2000-2006) only. They will not fit models with barn doors, 1995-1999 GMT400 SUVs, or 2007-up GMT900 SUVs. Compare your current housings with our photos before ordering.
Give a GMT800 SUV a modern smoked look with this C-shape LED pair. You get driver and passenger assemblies in a black housing, with a smoked lens over a C-shape LED running and brake tube. Reuse your factory reverse bulb. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2000-2006 | Chevrolet Suburban 1500 | Smoke C-shape LED housing. Not barn-door models |
| 2000-2006 | Chevrolet Suburban 2500 | Same housing |
| 2000-2006 | Chevrolet Tahoe | Same housing |
| 2000-2006 | GMC Yukon | Same housing, including Denali trim |
| 2000-2006 | GMC Yukon XL 1500 | Not barn-door models |
| 2000-2006 | GMC Yukon XL 2500 | Not barn-door models |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, smoke lens, C-shape LED tube
- Lighting: LED tail, brake, and turn; reuse the factory reverse bulb
- 12 V
- New aftermarket assemblies
- OEM cross-reference: 19168990, 19168991, GM2800170, GM2801170, 15832091, 15832092
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
Installation
- Open the liftgate or rear doors and peel back the cargo-area side trim to reach the nuts behind each lamp.
- Remove the nuts that hold the assembly to the quarter panel.
- Pull the housing straight back out of the opening, then unplug the factory connector and transfer the reverse bulb if it stays with the harness.
- Seat the new housing on the factory studs, reconnect, and tighten the nuts.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before putting the trim back.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.