Smoked LED Tail Lights Pair for Lexus ES 350 / ES 300h (2013-2018)

The 6th-gen ES already has a long, formal rear end. This smoked LED pair fills the 2013-2018 ES 350 and ES 300h opening with a red bar running light, a sequential amber turn, and a cleaner LED cutoff than aging factory lamps.

Features

• Full LED housings with a smoked lens. Running, brake, sequential turn, and reverse functions are built into the pair, as shown in the photos.
• Built for 2013-2018 ES 350 and ES 300h. On-car fitment is the sixth-generation XV60 ES. It does not fit 2007-2012 ES or 2019 and newer ES.
• Smoked housings with a sealed LED layout. The pair uses DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Tail Lights

• The factory 2013-2018 tails have dulled, and the rear of the ES no longer looks as sharp as the rest of the car.
• You want a smoked LED look and a sequential turn in the 6th-gen ES opening.
• You confirmed your ES is a 2013-2018 ES 350 or ES 300h, not a 2007-2012 or 2019 or newer car.
• You want a matched pair of outer tail lights.

Why Drivers Love This LED Pair

• The smoked LED bars give the 2013-2018 ES a cleaner night-drive look than the factory lamps.
• The housing is shaped for the XV60 opening, so the pair sits flush.
• We ship a matched pair with running, brake, turn, and reverse functions in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2013-2018 Lexus ES 350 and ES 300h (does not fit 2007-2012 or 2019 and newer)
• Lighting: Full LED, smoked lens, sequential turn signal
• Functions: Running light, brake, turn signal, reverse
• Housing / lens: Black housing, smoked lens
• Certifications: DOT, ISO, SAE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) tail light assembly
• Passenger-side (right) tail light assembly

Installation on the 2013-2018 Lexus ES

Work from the trunk. Disconnect the battery. Pull back the trunk side trim on the 2013-2018 ES enough to reach the tail light nuts. Unplug the harness, remove the fasteners, and slide each lamp out of the quarter opening. Set the new housings in place, reconnect, and test running lights, brake, turn signals, and reverse before the trim goes back on. Refit the trim and close the trunk. Professional installation is recommended.

FAQ

Will this fit a 2012 or earlier ES?
No. The 2007-2012 ES uses a different tail light. This pair is for 2013-2018 ES 350 and ES 300h only.

Will this fit a 2019 or newer ES?
No. The 2019 redesign uses a different tail light with a full-width lamp. This pair is for the 2013-2018 ES only.

Is a trunk light bar included?
No. This is a pair of the left and right outer tail lights.

What warranty do we include?
These tail lights are covered by a 1-year warranty.