5.8ft Soft Roll-Up Tonneau Cover for Chevy Silverado / GMC Sierra 1500 (2007-2026)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
This soft roll-up tonneau cover fits 2007-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks with the 5.8ft / 5'10" (70") short bed, including 2022 Silverado 1500 LTD and Sierra 1500 Limited with that bed length. The clamp-on vinyl cover rolls open for bed access and seals closed without drilling into the bed rails.
Important Fitment Note: Fits the 5.8ft / 5'10" (70") short bed only. Does not fit 2019 Silverado 1500 LD / Sierra 1500 Limited, CarbonPro beds, trucks with a factory side storage box, or setups where the cover would interfere with a power tailgate.
Fitment
| YEAR | MAKE / MODEL | SUBMODEL / BED | FITS |
|---|---|---|---|
| 2007-2026 | Chevrolet Silverado 1500 | 5.8ft / 5'10" (70") short bed | Yes |
| 2007-2026 | GMC Sierra 1500 | 5.8ft / 5'10" (70") short bed | Yes |
| 2022 | Chevrolet Silverado 1500 LTD | 5.8ft / 5'10" (70") short bed | Yes |
| 2022 | GMC Sierra 1500 Limited | 5.8ft / 5'10" (70") short bed | Yes |
| 2019 | Chevrolet Silverado 1500 LD | Any | No |
| 2019 | GMC Sierra 1500 Limited | Any | No |
| All listed years | Silverado / Sierra 1500 | CarbonPro bed or factory side storage box | No |
Specs
- Type: Soft roll-up tonneau cover
- Bed length: 5.8 ft / 5'10" (70")
- Bed width: 51 in
- Color: Black
- Material: Vinyl & Aluminum
- Finish: Textured
- Attachment: Clamp-on (no drill)
- Features: Soft cover, roll-up, quick release, quick assembly
- Max weight capacity: 200 lb
- Placement: Rear / truck bed
- Universal fitment: No
What's included
- 1 x soft roll-up tonneau cover assembly
- 1 x pair pre-assembled side rails
- Clamp-on mounting hardware
- Tension adjusters
- 1 x instruction manual
Installation — Silverado / Sierra 1500 (2007-2026)
- Confirm your truck has the 5.8ft / 5'10" (70") bed and is not a CarbonPro, factory side-storage, 2019 LD/Limited, or power-tailgate conflict setup.
- Clean the bed rails, then position the pre-assembled side rails along each bed rail.
- Secure the rails with the clamp-on mounting hardware — do not drill into the bed rails.
- Set the soft cover onto the rails and fasten the front attachment at the bulkhead.
- Adjust the tensioners until the vinyl sits flat and seals at the sides and tailgate.
- Roll the cover open and closed a few times to confirm smooth travel and a snug closed seal.
Buyer FAQ
What bed length does this soft roll-up tonneau fit? It fits the 5.8ft / 5'10" (70") short bed on 2007-2026 Silverado 1500 and Sierra 1500, including 2022 LTD/Limited trucks with that bed.
Will it fit a CarbonPro bed or a truck with factory side storage? No. The listing excludes CarbonPro beds and factory side storage boxes, and notes interference with power tailgates.
Do I need to drill the bed rails to install it? No. It uses a clamp-on mounting system with pre-assembled side rails and tension adjusters.