997.2-style LED tail light pair for the Porsche 911 Carrera 996

997.2 Style LED Tail Lights Pair for Porsche 911 Carrera (1999-2004)

$699.95
Skip to product information
997.2-style LED tail light pair for the Porsche 911 Carrera 996

997.2 Style LED Tail Lights Pair for Porsche 911 Carrera (1999-2004)

$699.95
DS-996-TAIL-9972-LED-PAIR-1999-2004

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A narrow-body 996 Carrera picks up the 997.2 LED lens in place of the amber bulb section. GENSSI supplies the pair and the resistors for the Carrera, Carrera 4, and Targa, and the factory sockets move over.

Important Fitment Note: These fit the narrow-body 1999-2004 Carrera, Carrera 4, and Targa. They do not fit the Turbo, GT2, GT3, or Carrera 4S. This is the 997.2 lens shape. It is not the 991.2 sequential pair. Mount each resistor on metal. They get hot.

Fitment

YEAR MAKE / MODEL FITS
1999-2004 Porsche 911 Carrera, Carrera 4, and Targa, narrow body Yes
1999-2004 Porsche 911 Turbo, GT2, GT3, and Carrera 4S No

Specs

  • Style: Red and clear 997.2-style lens with an oval LED center
  • Bulbs: LED center with the factory sockets reused. Two resistors are in the box
  • Sold as: Pair plus two resistors. Factory sockets transfer
  • Fit: 1999-2004 narrow-body Carrera, Carrera 4, and Targa. Not the wide body

Interchange

99663149500, 99663149600

What's included

  • 1x Driver tail light
  • 1x Passenger tail light
  • 2x Resistors

Installation — 1999-2004 Porsche 911 Carrera

  1. Open the engine cover and pull the carpet away from the lamp.
  2. Unplug the harness and pull the factory sockets out of the old lens. Those sockets go into the new lamp.
  3. Remove the nuts on the lamp studs and pull the lamp out.
  4. Fit the factory sockets into the new lamp. Mount each resistor against bare metal, clear of the carpet and the plastic engine trim. The resistors get hot.
  5. Plug the harness in, set the lamp, and tighten the nuts.
  6. Check tail, brake, turn, and reverse on both sides.

Buyer FAQ

Is this the 991.2 sequential pair? No. That pair is a different lens with a sequential signal. This one is the 997.2 oval LED shape for the narrow-body 996.

Does a Carrera 4S take these? No. The 4S, Turbo, GT2, and GT3 are wide-body cars and use a different lamp.

What has to be reused? The factory sockets. The box has the two lamps and two resistors, not new sockets.

You may also like