Illuminate Your Path: The APOLLO LED Chrome Projector Headlights for Your XJ/YJ
Tired of dim, outdated headlights that leave you guessing on the road? Upgrade your Jeep Cherokee XJ or Wrangler YJ with the APOLLO LED Chrome Projector Headlights and experience a night-and-day difference in visibility and style. These aren't just headlights; they’re a statement of performance, ensuring you conquer every trail and every drive with confidence and a commanding presence.
Why You Need This
-
Unrivaled Brightness: Featuring XM-L2 CREE LED chips, these headlights deliver professional-grade illumination, significantly outperforming your stock halogens.
-
Superior Beam Control: The advanced projector design minimizes glare for oncoming traffic while precisely directing light onto the road where you need it most, enhancing both safety and your driving experience.
-
Modern Aesthetic Upgrade: Ditch the dull, sealed-beam look. The sleek chrome finish and projector lens design give your XJ or YJ a cutting-edge appearance that commands attention.
-
Effortless Installation: Designed as a direct plug-and-play replacement using the H4 connection, upgrading your lighting system is simple and straightforward.
Technical Specifications
| Part Numbers |
APOLLO-XJ/YJ-CHROME |
| Fitment |
Jeep Cherokee XJ: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Jeep Wrangler YJ: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
|
| Specs |
Low Beam Power: 45W
Low Beam Lumens: <3200 Lumens
High Beam Power: 85W
High Beam Lumens: <5500 Lumens
LED Chips: XM-L2 CREE
Lifespan: Up to 30,000 hours
Housing Material: Aluminum Alloy (Heat Dissipating)
Connection: H4 Plug-and-Play
DRL Function: Requires wiring to a 12V power source (e.g., switch, turn signal, or park lamp wire)
|
At GENSSI, we stand behind the quality and performance of our products. Experience the GENSSI Promise: exceptional lighting, durable construction, and a drive transformed.
Installation
- Park on level ground, turn the engine off, and disconnect the negative battery cable.
- Remove the grille or headlight bezel/trim ring screws (varies by Jeep model) to access the headlight.
- Remove the retaining ring screws, pull the old headlight forward, and unplug it from the harness.
- Plug in the new LED headlight (use the included adapter if one is supplied for your model) and test high/low beam before fully mounting.
- Mount the new headlight with the retaining ring, then reinstall the bezel or grille.
- Reconnect the battery, check all functions (high, low, DRL/halo if equipped), and aim the headlights on a flat wall before night driving.
Some vehicles may need anti-flicker or CANbus decoders to prevent flicker or dash warnings. Professional installation is recommended if you are unsure.
