Black Amber Halogen Headlights Pair for Jeep Grand Cherokee (1999-2004)

Black Amber Halogen Headlights Pair for Jeep Grand Cherokee (1999-2004)

$99.95
Skip to product information
Black Amber Halogen Headlights Pair for Jeep Grand Cherokee (1999-2004)

Black Amber Halogen Headlights Pair for Jeep Grand Cherokee (1999-2004)

$99.95
DS-55155129AB-BK

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: Fits 1999-2004 Jeep Grand Cherokee only. Not for the Jeep Cherokee. Bulbs are not included.

New black amber halogen headlights, sold as a driver-side and passenger-side pair for the 1999-2004 Jeep Grand Cherokee application listed below.

Fitment

Years Vehicle Notes
1999-2004 Jeep Grand Cherokee Grand Cherokee only; not Cherokee

Specs

  • Condition: New
  • Sold as: Left and right pair
  • Style: Black Amber
  • Lighting type: Halogen
  • Bulb application: 9006 low beam; 9005 high beam; 3157 signal
  • Bulbs not included

Shop by bulb size: 9005 | 9006

In the Box

  • 1 driver-side headlight assembly
  • 1 passenger-side headlight assembly

Interchange References

5103401AA, 55155129AB, 5103400AA, 55155553AI, 55155129AJ, CH2502138, CH2502121, CH2502120

Installation: 1999-2004 Jeep Grand Cherokee

Professional installation and beam aiming are recommended.

  1. Open the hood and remove the long top-center bolt on the headlight (a 9/32-inch socket on this WJ procedure).
  2. Pull the lamp straight forward to release its three ball studs from the header-panel clips, prying gently if needed. Lift the gray locks and unplug the bulb harnesses.
  3. Install compatible 9005 high-beam, 9006 low-beam and 3157-type signal bulbs. Align the three studs with the header-panel clips, press the lamp home and snug the top bolt about a quarter turn after it bottoms out. Test and aim both lamps.

Frequently Asked Questions

What should I check before ordering?
Fits 1999-2004 Jeep Grand Cherokee only. Not for the Jeep Cherokee. Bulbs are not included.

Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.

What access is needed to replace the assemblies?
Open the hood and remove the long top-center bolt on the headlight (a 9/32-inch socket on this WJ procedure).

You may also like