Black Amber Halogen Projector Headlights Pair for Kia Optima Korea Built (2011-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Black Amber Halogen Projector Headlights Pair for Kia Optima Korea Built (2011-2013). New driver and passenger replacement assemblies. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2011-2013 | Kia Optima | Korea-built non-Hybrid; factory halogen only |
Specs
- Sold as: driver and passenger pair
- Housing/style: Black Amber Corner
- Lighting: Halogen Projector
- Low beam H11B; high beam H1; signal 1157A; marker 194. Bulbs not included.
Bulb sizes: H11B | H1 | 1157A | 194
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
921012T121, 921022T121, KI2502155, KI2503155
Installation: Kia Optima Korea Built (2011-2013)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Disconnect the battery following the Optima service procedure. Remove the upper grille/bumper-cover bolts and clips, wheel-arch fasteners and lower clips, then unplug the fog lamps and support the fascia off the car.
- Remove the two headlamp mounting bolts and disconnect the rear connector. Protect the housing holding clip while drawing the projector assembly forward; transfer compatible H11B/H1 and signal/marker bulbs.
- Seat the holding clip and lamp guides before tightening the mounts. Reconnect and test the halogen lamps, refit the fascia and wheel-liner fasteners and have the headlight aim checked.
Frequently Asked Questions
Which vehicles and factory lighting equipment are compatible?
2011-2013 Kia Optima (Korea-built non-Hybrid; factory halogen only). Korea-built, non-Hybrid Optima with factory halogen headlights only. Not Hybrid, US-built or factory HID/xenon models. Bulbs are not included.
Which bulbs are used and included?
Low beam H11B; high beam H1; signal 1157A; marker 194. Bulbs not included.
What access is needed for installation?
The Optima front bumper cover is removed before releasing the two headlamp bolts. Professional installation and beam aiming are recommended.