Black Full LED Headlights Pair for Kenworth T170 T270 T300 T370 T400 T660 T700 (2008-2018)
$567.95
Skip to product information
Black Full LED Headlights Pair for Kenworth T170 T270 T300 T370 T400 T660 T700 (2008-2018)
$567.95
DS-ET01-503G06
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Kenworth T170, T270, and T370 (2008-2018), T300 (2008 only), T400 (2010-2018), T660 (2008-2018), and T700 (2011-2016) that use this full-LED housing. They will not fit T680, T880, or the 2022-up T180-T480 generation. Compare your current lamps with our photos before ordering.
Replace the factory lamps on these Kenworth conventionals with this black full-LED pair. Each assembly uses LED high and low beams, a LED daytime running light, and an amber LED turn and side marker. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2018 | Kenworth T170 | |
| 2008-2018 | Kenworth T270 | |
| 2008 | Kenworth T300 | Final year |
| 2008-2018 | Kenworth T370 | |
| 2010-2018 | Kenworth T400 | |
| 2008-2018 | Kenworth T660 | |
| 2011-2016 | Kenworth T700 |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Full LED, including daytime running light
- Housing: Black, clear lens, amber turn and side marker
- Operating voltage: 12V
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Installation: Kenworth T170, T270, T300, T370, T400, T660, and T700 (2008-2018)
On these Kenworth conventionals the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Kenworth T170, T270, and T370 (2008-2018), T300 (2008 only), T400 (2010-2018), T660 (2008-2018), and T700 (2011-2016) with this full-LED housing. Compare your current lamps with our photos before ordering.
Will they fit a T680 or T880?
No. Those models use a different headlight and are not covered.
Will they fit a 2022-up T180, T280, T380, or T480?
No. That generation uses a different headlight and is not covered.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.