Black Halogen Headlights Pair for Honda Fit (2007-2008)
$435.95
Skip to product information
Black Halogen Headlights Pair for Honda Fit (2007-2008)
$435.95
DS-33151-SLN-A01ZC
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2007-2008 Honda Fit (first generation). They will not fit the 2009 and newer Fit, which uses a different headlight. Bulbs are not included. Move your existing bulbs over or buy new ones.
Make your first-generation Fit look sharp again. This black-housing halogen pair replaces yellowed, cracked, or foggy headlights on the 2007-2008 Fit, and it plugs into the factory connector with no splicing. Both lamps are DOT and SAE compliant.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2007-2008 | Honda Fit | First-generation US Fit. Not the 2009 and newer Fit. |
Specs
- Sold as: driver and passenger pair
- Housing / style: black halogen housing, clear lens
- Lighting: halogen, bulbs not included
- Plugs into the factory connector (no splicing)
- DOT and SAE compliant
- New aftermarket assemblies, designed to replace the factory halogen units
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
Replaces the original halogen housings used under OEM 33151-SLN-A01ZC (driver) and 33101-SLN-A01ZC (passenger), and Partslink HO2502131 / HO2503131.
Installation: Honda Fit (2007-2008)
On the 2007-2008 Fit, the front bumper cover has to come off to reach the headlight bolts. Professional installation and beam aiming are recommended. Turn off the lights and ignition and disconnect the negative battery cable before you start.
- Open the hood and remove the clips along the top of the bumper cover, then the screws and clips along the bottom.
- Pull the bumper cover forward to unhook it from the wheel arches and the upper beam. Unplug any fog-light wiring and set the cover aside.
- Remove the four 10 mm headlight bolts, pull the headlight forward, and unplug the connectors.
- Move your bulbs into the new headlight, plug it in, and bolt it in place. Repeat on the other side.
- Reinstall the bumper cover, making sure every hook and clip is seated. Reconnect the battery, test all functions, and aim the lamps before night driving.
Frequently Asked Questions
Which vehicles do these headlights fit?
2007-2008 Honda Fit (first generation). They do not fit the 2009 and newer Fit. Compare your current lamps with our photos before ordering.
Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do they include bulbs?
No. Bulbs are not included. Move your existing bulbs to the new assemblies or buy new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory headlight connector.
How are they installed on a 2007-2008 Honda Fit?
The front bumper cover comes off first: the top clips, the bottom screws and clips, then unhook it from the wheel arches. Each headlight is held by four 10 mm bolts. Move your bulbs to the new lamp, reinstall, and aim before night driving.