Black Halogen Projector Headlights Pair with LED DRL for Honda CR-V (2017-2022)

Give your fifth-generation CR-V a crisp, clean face again. This pair replaces faded, hazy or cracked halogen headlights with clear lenses, a sharp halogen projector low beam and the LED daytime running light built into each lamp. Each one bolts to the factory mounting points and plugs into the factory connector, with no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing: black with chrome trim, clear lens, amber corner
• Low beam: halogen projector; high beam: halogen reflector
• Daytime running light: LED, built in
• Bulbs and sockets not included (reuse your factory bulbs)
• DOT and SAE compliant
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side halogen projector headlight with LED DRL
• Passenger-side halogen projector headlight with LED DRL

Interchange References

Replaces the original assemblies commonly crossed with 33150-TLA-A01, 33100-TLA-A01, 33150-TLA-305, 33100-TLA-305, 33150-TLA-A21, 33100-TLA-A21, HO2502180, HO2503180.

Installation: Honda CR-V (2017-2022)

On the 2017-2022 CR-V the headlight bolts are reached after the front bumper cover comes off. Allow a couple of hours and get a helper for the bumper. Turn the lights and ignition off before you start.

1. Remove the bulkhead cover across the top of the radiator support, then the bumper bolts and clips at the top, in each wheel well and underneath.
2. Pull the bumper out at each wheel arch to release the side spacer hooks, then release the center hooks and unplug the fog lights and any sensors.
3. Unplug the headlight connector and release the harness clips, then remove the screw and three bolts and pull the lamp forward.
4. Move your bulbs and sockets to the new lamp, plug it in, seat it and tighten the bolts and screw evenly.
5. Refit the bumper cover and every clip, test low, high, LED DRL and turn signal functions, then aim the beams.

Frequently Asked Questions

Which vehicles do these headlights fit?
2017-2022 Honda CR-V gas models with factory halogen projector headlights with LED DRL (LX, EX, EX-L and other trims with the same lamp). They do not fit factory full LED headlights such as the Touring or the CR-V Hybrid. Compare your current lamps with our photos before ordering.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

How do I tell halogen from full LED headlights?
Look at your lamp: the halogen version has a single round projector lens for the low beam and a separate reflector bowl for the high beam, and takes replaceable bulbs. The factory full LED lamp (Touring, Hybrid) has LED modules for both beams and needs our full LED pair instead.

Are bulbs included?
No. Bulbs and sockets are not included. Move your factory ones to the new lamps.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2017-2022 Honda CR-V?
The front bumper cover has to come off. Then unplug the headlight, remove the screw and three bolts, move your bulbs over and install the new lamp. Aim the beams when you are done.