Black Halogen Projector Headlights Pair with LED DRL Halo for Dodge Challenger SXT (2015-2023)
$286.95
Skip to product information
Black Halogen Projector Headlights Pair with LED DRL Halo for Dodge Challenger SXT (2015-2023)
$286.95
DS-68174065AG
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2015-2023 Dodge Challenger, such as the SXT, that came with factory halogen projector headlights and LED halo running lights. They will not fit cars with factory HID / xenon or LED headlights, or the air-catcher headlight (the driver-side lamp with a built-in air intake used on some SRT and performance models). They will not fit the 2008-2014 Challenger. Bulbs and sockets are installed.
Keep the classic quad-halo stare of your Challenger looking its best. This black pair replaces faded, cracked or fogged 2015-2023 halogen headlights with clear lenses, halogen projectors and glowing LED halo rings. Bulbs and sockets come installed, and each lamp plugs into the factory connector with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2015-2023 | Dodge Challenger | SXT and other trims with factory halogen projector headlights and LED DRL halos, without the air-catcher headlight. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens
- Low and high beam: halogen projectors (bulbs installed)
- Daytime running light: LED halo rings
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side projector headlight assembly
- Passenger-side projector headlight assembly
- Halogen bulbs and sockets (pre-installed)
Interchange References
Replaces the original assemblies commonly crossed with 68174065AG, 68174064AG, 68174065AC, 68174064AC, CH2502267, CH2503267.
Installation: Dodge Challenger (2015-2023)
The 2015-2023 Challenger headlights bolt to the body behind the front bumper cover, so the cover must come off. Allow a couple of hours and have a helper. Turn the lights off and disconnect the negative battery cable first.
- Open the hood and lift out the two radiator cover panels. Remove the push clips along the top edge of the bumper cover and the bolt just inside each fender edge.
- Turn each front wheel, pull back the fender liner clips, and remove the bumper-to-fender fastener in each wheel well (T30 or 10 mm depending on the car).
- Remove the screws under the bumper that hold it to the undertray, unplug the fog light connectors, release the sides and lift the cover forward off the car.
- Unplug the headlight connector (some cars have a second one below it), remove the top bolt and the two lower bolts (8 mm or T30) and pull the headlight forward.
- Fit the new lamp with the factory hardware, plug it in, refit the bumper cover, reconnect the battery, test every function and aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2015-2023 Dodge Challenger with factory halogen projector headlights and LED halo running lights, such as the SXT. Not for HID / LED headlights, the air-catcher headlight, or 2008-2014 models. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do these fit a Challenger with the air-catcher headlight?
No. These are for the standard lamp without the built-in air intake.
Are bulbs included?
Yes. The halogen bulbs and sockets come installed.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2015-2023 Dodge Challenger?
The front bumper cover has to come off. Remove the radiator covers, top clips, wheel-well and under-bumper fasteners, lift the cover off, then unbolt the headlight (one top and two lower bolts) and plug in the new one.