Black Halogen Projector Headlights Pair with Sequential LED DRL for Toyota Corolla Sedan (2011-2013)
$364.95
Skip to product information
Black Halogen Projector Headlights Pair with Sequential LED DRL for Toyota Corolla Sedan (2011-2013)
Black Halogen Projector Headlights Pair with Sequential LED DRL for Toyota Corolla Sedan (2011-2013)
$364.95
DS-296321878911
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2011-2013 Toyota Corolla sedan with factory halogen headlights. They will not fit the 2009-2010 Corolla (different lamp; we carry that pair here), the 2014-2016 Corolla (that pair is here), the Corolla Matrix, or any car with factory HID / xenon headlights. Bulbs are not included: these lamps take an H7 low beam and an H1 high beam bulb.
Give your 2011-2013 Corolla a custom look that still bolts right in. This black-housing pair swaps the plain factory lamps for dual halogen projectors, a bright white LED light bar and a sequential-style amber LED turn signal, for a sharper, more modern front end. Each lamp fits the factory mounting points and connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2011-2013 | Toyota Corolla | Sedan with factory halogen headlights: Base, CE, L, LE, S, XLE and XRS. Not 2009-2010 or 2014+. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens
- Low and high beam: halogen projector
- Bulbs: H7 low beam, H1 high beam (bulbs not included)
- LED white light bar and switchback amber LED turn signal, built in
- DOT and SAE compliant
- Mounts to the factory points and connectors (no splicing)
In the Box
- Driver-side halogen projector headlight with LED light bar
- Passenger-side halogen projector headlight with LED light bar
Installation: Toyota Corolla Sedan (2011-2013)
On the 2011-2013 Corolla the grille and front bumper cover come off to reach all of the headlight bolts. It is a 10 mm socket and trim-clip job. Turn the lights and ignition off before you start.
- Remove the radiator support cover and grille fasteners, then the 10 mm bolts under each corner of the bumper, the wheel-well screws and the upper bumper fasteners.
- Pull the bumper cover forward, unplug any fog light connectors and set it aside.
- Remove the three 10 mm headlight bolts, release the upper plastic tab and the front locking tab, then unplug the connectors and pull the lamp out.
- Install H7 low beam and H1 high beam bulbs in the new lamp, plug it in, seat the front corner and upper tab, and reinstall the bolts.
- Refit the bumper cover and grille, test low, high, LED bar and turn signals, then aim the projectors.
Frequently Asked Questions
Which vehicles do these headlights fit?
2011-2013 Toyota Corolla sedans with factory halogen headlights (Base, CE, L, LE, S, XLE, XRS). They do not fit 2009-2010, 2014+, the Matrix, or factory HID headlights. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
What bulbs do I need?
Each lamp takes an H7 low beam and an H1 high beam bulb. Bulbs are not included.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2011-2013 Toyota Corolla sedan?
Remove the grille and front bumper cover, take out the three 10 mm headlight bolts, release the tabs and unplug the old lamp. Fit H7 and H1 bulbs to the new lamps, bolt them in, refit the bumper and aim the beams.