Black Halogen Projector LED DRL Headlights Pair for GMC Yukon / Yukon XL (2015-2020)
$298.95
Skip to product information
Black Halogen Projector LED DRL Headlights Pair for GMC Yukon / Yukon XL (2015-2020)
$298.95
DS-GM2503409-BK-HAL
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Factory HALOGEN headlight models only. Not compatible with factory HID/Xenon headlights or Denali. Match the original halogen connectors before ordering.
Black Halogen Projector LED DRL Headlights Pair for GMC Yukon / Yukon XL (2015-2020). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2015-2020 | GMC Yukon | Factory HALOGEN headlight models only. Not compatible with factory HID/Xenon headlights or Denali. Match the original halogen connectors before ordering. |
| 2015-2020 | GMC Yukon XL | Factory HALOGEN headlight models only. Not compatible with factory HID/Xenon headlights or Denali. Match the original halogen connectors before ordering. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- Low beam H11; high beam HB3/9005; LED daytime running lights and LED turn signals. Low/high-beam bulbs and resistors included.
- DOT/SAE compliance stated in the product listing
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- H11 low-beam bulbs
- 9005 high-beam bulbs
- Integrated LED DRL and turn signals
- Resistors
Interchange References
GM2503409, GM2502409, GM2503473, GM2502473, 23387148, 23387147, 84155709, 84155710, 84564094, 84294008, 84564093, 84294007
Installation: GMC Yukon / Yukon XL (2015-2020)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Remove the radiator-shroud push clips. Release the upper grille/front-fascia fasteners and support the grille/fascia forward, disconnecting any attached fog-lamp wiring as required.
- With the lower mounting area exposed, remove the upper and lower headlamp bolts and unplug the housing connectors. Keep the original halogen harness separated from any HID equipment; this pair is not an HID conversion.
- Position the replacement and its included resistors without trapping wiring, reconnect the harness and secure the brackets. Test H11 low beams, 9005 high beams, LED DRL and signals before refitting the fascia and shroud; have beam aim checked.
Frequently Asked Questions
Which factory lighting configuration is compatible?
Factory HALOGEN headlight models only. Not compatible with factory HID/Xenon headlights or Denali. Match the original halogen connectors before ordering.
Which bulbs are used and included?
Low beam H11; high beam HB3/9005; LED daytime running lights and LED turn signals. Low/high-beam bulbs and resistors included.
What access is needed for installation?
Grille/fascia access is needed to reach the lower lamp bolts; support the painted fascia and disconnect attached fog-light wiring. Professional installation and beam aiming are recommended.