Chrome Amber Corner Halogen Headlights Pair for Ford Flex (2009-2012)
$261.95
Skip to product information
Chrome Amber Corner Halogen Headlights Pair for Ford Flex (2009-2012)
$261.95
DS-8A8Z13008A-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits 2009-2012 Ford Flex SE and SEL with factory halogen headlights only. Not compatible with Flex Limited or Titanium models or factory HID headlights. Bulbs are not included.
New chrome amber corner halogen headlights, sold as a driver-side and passenger-side pair for the 2009-2012 Ford Flex (factory halogen) application listed below.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2009-2012 | Ford Flex | SE/SEL factory halogen only; excludes Limited, Titanium and HID |
Specs
- Condition: New
- Sold as: Left and right pair
- Style: Chrome Amber Corner
- Lighting type: Halogen
- Bulb application: H13 combined high/low beam
- Bulbs not included
Shop by bulb size: H13 | 3157NA
In the Box
- 1 driver-side headlight assembly
- 1 passenger-side headlight assembly
Interchange References
8A8Z13008A, FO2503266, FO2502266
Installation: 2009-2012 Ford Flex (factory halogen)
Professional installation and beam aiming are recommended.
- With the headlamp switch and ignition off, remove the front bumper cover; the first-generation Flex service procedure requires the cover off to reach the lamp hardware. Support the cover and disconnect any attached wiring.
- Remove the pin-type retainer and the four headlamp bolts, then pull the assembly forward and disconnect its electrical connectors.
- Transfer compatible H13 headlamp and signal bulbs, handling the bulb glass only by its base. Reconnect the harnesses, reinstall the four bolts and pin retainer, refit the bumper cover, then test all functions and have the beams aimed.
Frequently Asked Questions
What should I check before ordering?
Fits 2009-2012 Ford Flex SE and SEL with factory halogen headlights only. Not compatible with Flex Limited or Titanium models or factory HID headlights. Bulbs are not included.
Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.
What access is needed to replace the assemblies?
With the headlamp switch and ignition off, remove the front bumper cover; the first-generation Flex service procedure requires the cover off to reach the lamp hardware. Support the cover and disconnect any attached wiring.