Chrome Amber HID Projector Headlights Pair for Ford Flex (2009-2012)
$587.95
Skip to product information
Chrome Amber HID Projector Headlights Pair for Ford Flex (2009-2012)
$587.95
DS-BA8Z13008A-HID
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Factory HID/XENON Flex only; NOT halogen and NOT a halogen-to-HID conversion kit. D3S bulbs are NOT included. Have a qualified installer confirm any required original HID-electronics transfer; do not assume new bulbs or electronics are supplied.
Chrome Amber HID Projector Headlights Pair for Ford Flex (2009-2012). New driver and passenger replacement assemblies. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2009-2012 | Ford Flex | Factory HID/xenon only; not halogen |
Specs
- Sold as: driver and passenger pair
- Housing/style: Chrome Amber Corner
- Lighting: HID Projector
- D3S HID/xenon bulbs are NOT included. Original HID electronics compatibility must be checked before ordering.
Bulb sizes: D3S
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
BA8Z13008A, 8A8Z13008D, 114-01176BR
Installation: Ford Flex (2009-2012)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Switch off all exterior lights and follow the Ford battery-disconnection/high-voltage safety procedure. On the 2009-2012 Flex, remove the front bumper cover, then the headlamp pin-type retainer and four mounting bolts.
- Support the housing and disconnect its electrical connectors. A qualified HID technician should check the original D3S bulbs and compatible electronics for transfer as required; the bulbs are not supplied. Do not handle an energized xenon system or touch bulb glass.
- Seat the replacement housing guides, reconnect the correct factory-HID connectors and reinstall the four bolts, pin retainer and bumper cover. Test both beams, signals and markers and have headlight aim checked.
Frequently Asked Questions
Which vehicles and factory lighting equipment are compatible?
2009-2012 Ford Flex (Factory HID/xenon only; not halogen). Factory HID/XENON Flex only; NOT halogen and NOT a halogen-to-HID conversion kit. D3S bulbs are NOT included. Have a qualified installer confirm any required original HID-electronics transfer; do not assume new bulbs or electronics are supplied.
Which bulbs are used and included?
D3S HID/xenon bulbs are NOT included. Original HID electronics compatibility must be checked before ordering.
What access is needed for installation?
The first-generation Flex front bumper cover is removed, followed by a pin retainer and four headlamp bolts. Professional HID service is recommended. Professional installation and beam aiming are recommended.