Chrome Halogen Headlights Pair for Chevrolet Equinox (2010-2015)
$136.95
Skip to product information
Chrome Halogen Headlights Pair for Chevrolet Equinox (2010-2015)
$136.95
DS-23308255-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Fits LS/LT models with factory halogen headlights only. Not compatible with factory HID headlights.
Replace your Chevrolet Equinox front lamps with a new driver and passenger pair in chrome finish, with clear lenses.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2010-2015 | Chevrolet Equinox | LS/LT; factory halogen only; not HID |
Specs
- Sold as: driver and passenger pair
- Housing/style: Chrome
- Lighting: Halogen
- Low beam: H11; high beam: 9005; signal: 7444NA; marker: 168. Bulbs included.
- Bulbs included
Bulb sizes: H11 | 9005 | 7444NA | 168
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- Low- and high-beam bulbs
- 7444NA turn-signal bulbs
- 168 side-marker bulbs
Interchange References
23308255, 23308256, 23308253, 23308254, GM2502338, GM2503338
Installation: 2010-2015 Chevrolet Equinox
Professional installation and beam aiming are recommended. Switch off the ignition and lights before servicing.
- Remove the upper engine-compartment trim and push pins, then release the four upper-grille T20 fasteners. Remove the wheel-well shield clips/T20 screws and bumper-to-fender 7 mm bolts.
- Disconnect the fog-lamp sockets if equipped and release the bumper side clips. With the fascia supported forward, remove the recessed 10 mm and upper/lower 7 mm headlamp bolts, then release the outer guide pin/tab and unplug the harness.
- Seat the new headlamp on its guide, reconnect its wiring and install the mounting bolts. Test the included bulbs before refitting the bumper, grille and wheel liners, then have the headlight beams aimed.
Frequently Asked Questions
Which vehicles do these headlights fit?
Fits 2010-2015 Chevrolet Equinox. Fits LS/LT models with factory halogen headlights only. Not compatible with factory HID headlights.
Which bulbs do these assemblies use?
Low beam: H11; high beam: 9005; signal: 7444NA; marker: 168. Bulbs included. Bulbs included.
What access is needed for installation?
Yes. The front bumper cover is released to reach the recessed and lower headlight mounting bolts. Professional installation and beam aiming are recommended.