Chrome Halogen Headlights Pair for Hino 145 165 185 238 258 268 338 358 (2005-2020)
$375.95
Skip to product information
Chrome Halogen Headlights Pair for Hino 145 165 185 238 258 268 338 358 (2005-2020)
$375.95
DS-81110E0530-CH
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Hino 145, 165, and 185 (2006-2010), 238, 258, and 258LP (2006-2019), 258ALP (2008-2014), 268 (2005-2020), 268A (2008-2014), 308 (2006-2008), 338 (2006-2019), 338CT (2008-2014), and 358 (2008-2019) that use this chrome or silver-grey halogen housing. They will not fit 2021-up cabs. Compare your current lamps with our photos before ordering.
Replace the factory lamps on these Hino conventionals with this chrome halogen pair. Each assembly uses the clear-lens housing with an amber reflector and includes H4 bulbs. Sold as a driver and passenger pair. This is the chrome or silver-grey housing, not the black version of the same lamp.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2006-2010 | Hino 145 | |
| 2006-2010 | Hino 165 | |
| 2006-2010 | Hino 185 | |
| 2006-2019 | Hino 238 | |
| 2006-2019 | Hino 258 | |
| 2008-2014 | Hino 258ALP | |
| 2006-2019 | Hino 258LP | |
| 2005-2020 | Hino 268 | |
| 2008-2014 | Hino 268A | |
| 2006-2008 | Hino 308 | |
| 2006-2019 | Hino 338 | |
| 2008-2014 | Hino 338CT | |
| 2008-2019 | Hino 358 |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Halogen, with H4 bulbs included (3157 yellow for the turn signal)
- Housing: Chrome / silver-grey, clear lens, amber reflector
- Operating voltage: 12V
- Certification: DOT-certified, SAE-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- H4 bulbs as supplied
Interchange References
81110E0530, 81150E0530, 9HI94602501, 9HI94602502, 8885760, 8885759
Installation: Hino 145, 165, 185, 238, 258, 268, 308, 338, and 358 (2005-2020)
On these Hino conventionals the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Hino 145, 165, 185, 238, 258, 268, 308, 338, and 358 trucks in the years listed above with this chrome or silver-grey halogen housing. Compare your current lamps with our photos before ordering.
Will they fit a 2021 or newer Hino?
No. Later cabs use a different headlight and are not covered.
Is this the black housing?
No. This pair is the chrome or silver-grey housing. A black pair for the same trucks is listed separately.
Do I need bulbs?
No. H4 bulbs are included, plus 3157 yellow bulbs for the turn signal.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.