Chrome Halogen Headlights Pair for International 4100 4200 4300 4400 8500 8600 Durastar (2002-2017)
$265.95
Skip to product information
Chrome Halogen Headlights Pair for International 4100 4200 4300 4400 8500 8600 Durastar (2002-2017)
$265.95
DS-3561963C2
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit International 4100 (2006-2012), 4200 (2002-2010), 4300 and 4400 (2002-2017), 8500 (2002-2007), 8600 SBA and TranStar (2003-2017), and Durastar (2013-2017) that use this chrome halogen housing. They will not fit later HV-series cabs that use a different lamp. Bulbs are not included. Compare your current lamps with our photos before ordering.
Replace the factory lamps on these International conventionals with this chrome halogen pair. Each assembly uses the long crescent housing with a clear lens and amber reflector. Sold as a driver and passenger pair. Bulbs are not included; the housing uses HB5/9007 for high and low beam and 3157 for the turn and position functions.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2006-2012 | International 4100 | |
| 2002-2010 | International 4200 | |
| 2002-2017 | International 4300 | |
| 2002-2017 | International 4400 | |
| 2002-2007 | International 8500 | |
| 2003-2017 | International 8600 | Includes 8600 SBA (2003-2007) and 8600 TranStar (2008-2017) |
| 2013-2017 | International Durastar |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: Halogen, bulbs not included (HB5/9007 high and low beam; 3157 turn and position)
- Housing: Chrome, clear lens, amber reflector
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
3561963C2, 3561964C2
Installation: International 4100, 4200, 4300, 4400, 8500, 8600, and Durastar (2002-2017)
On these International conventionals the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header. Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test every lighting function. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
International 4100 (2006-2012), 4200 (2002-2010), 4300 and 4400 (2002-2017), 8500 (2002-2007), 8600 SBA and TranStar (2003-2017), and Durastar (2013-2017) with this chrome halogen housing. Compare your current lamps with our photos before ordering.
Do I need bulbs?
Yes. Bulbs are not included. The housing uses HB5/9007 for high and low beam and 3157 for the turn and position functions.
Are these LED projector lamps?
No. These are halogen assemblies, not the LED projector version of this opening.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.