Chrome Halogen Projector Headlights Pair for Nissan Altima S (2019-2022)

Make your Altima S look sharp again. This chrome-housing projector pair replaces hazy, yellowed or cracked 2019-2022 headlights with crisp clear lenses, a halogen projector low beam and the bold amber accent sweep. Each lamp bolts to the factory mounting points and plugs into the factory connector, with no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing: chrome and black, clear lens, amber accent
• Low beam: halogen projector; high beam: halogen reflector
• Bulbs and sockets not included (reuse your factory bulbs)
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side halogen projector headlight assembly
• Passenger-side halogen projector headlight assembly

Interchange References

Replaces the original assemblies commonly crossed with 26060-6CA0A, 26010-6CA0A, 26060-6CA0B, 26010-6CA0B, NI2502299, NI2503299, NI2502265, NI2503265.

Installation: Nissan Altima S (2019-2022)

On the 2019-2022 Altima the headlight bolts are hidden behind the front bumper cover, so it has to come off. Have a helper, trim tools and painter's tape ready. Turn the lights and ignition off before you start.

1. Tape the bumper, fender and lamp edges. Remove the pins across the top of the grille and bumper, the fender liner bolts and clips, and the fasteners under the bumper.
2. Turn the wheels outward for room, release each bumper corner, support the cover and unplug any fog light or sensor connectors before setting it aside.
3. Remove the headlight mounting bolts, support the housing and unplug its connector without pulling on the wires. Remove your bulbs and sockets.
4. Fit your bulbs to the new lamp, plug it in, seat it on the locating pins and snug the bolts evenly.
5. Reconnect everything on the bumper, refit every fastener, test all light functions and aim the beams.

Frequently Asked Questions

Which vehicles do these headlights fit?
2019-2022 Nissan Altima S sedans (2.5L) with factory halogen projector headlights only. They do not fit the SR, SV, SL or Platinum, or the 2023+ Altima. Compare your current lamps with our photos before ordering.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Are bulbs included?
No. Bulbs and sockets are not included. Move your factory ones to the new lamps.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2019-2022 Nissan Altima S?
Remove the front bumper cover, unbolt the headlight, unplug its connector, move your bulbs over and install the new lamp. Aim the beams afterward.