Chrome Halogen Projector Headlights Pair w/ Bulbs for Ford Expedition (2015-2017)

Replace yellowed or cracked headlights on your 2015-2017 Ford Expedition with factory projector headlights with this brand-new pair of chrome halogen projector headlights, bulbs included.

Fitment

Will NOT fit: Expedition without projector beams (reflector lamps); 2018+ Expedition; 2007-2014 Expedition.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Low beam: halogen projector
• Bulbs: included (sizes not stated in listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: FL1Z13008C. Partslink: FO2503334, FO2502334.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs included

Installation

1. Open the hood and remove the two 10 mm bolts on top of the headlamp.
2. Lift the retaining tab next to the bolts past its notch.
3. Pull and wiggle the lamp forward to free the two lower locating pins from their sockets (on some trucks press-on retainers on the pins must be removed first).
4. Unplug the connectors and twist out the turn-signal socket.
5. Transfer the turn socket, plug in, push the new lamp onto the pins until the clip catches, refit the two bolts and aim. No bumper removal needed.

Steps compiled from Expedition Forum headlight-removal threads, Fused LED 2015-2017 Expedition video and Ford parts catalog (FL1Z-13008). Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.

Projector or reflector: which Expedition headlight do I have?
Ford lists FL1Z-13008-C as the 2015-2017 lamp WITH projector beam. If your low beam has a round lens, you have the projector version; reflector trucks need the reflector lamp.

Do I need to remove the front bumper to replace these headlights?
No. On the 2015-2017 Expedition the headlamp comes out from above: two 10 mm bolts, one retaining tab, and the lamp pulls forward off two locating pins.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.