Chrome Halogen Tail Lights Pair for Chevy Silverado 1500 (2014-2018) / 2500 HD 3500 HD (2015-2019)
$99.95
Skip to product information
Chrome Halogen Tail Lights Pair for Chevy Silverado 1500 (2014-2018) / 2500 HD 3500 HD (2015-2019)
$99.95
DS-23141274
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These are 3-hole halogen tail lights. They fit Chevy Silverado 1500 (2014-2018), Silverado 1500 LD (2019), Silverado 2500 HD and 3500 HD (2015-2019), and GMC Sierra 3500 HD dually (2015-2019) that use this 3-hole halogen housing. They will not fit 4-hole housings, trucks with factory LED tail lights, 2019-up Silverado 1500 except 1500 LD, or Sierra 1500 / 2500. Compare the back of your current housing and our photos before ordering.
Replace cloudy 2014-2018 Silverado halogen tails with this chrome and red pair. Each housing has a red lens over a chrome housing, with separate tail/brake, reverse, and red side-marker sections. These are halogen assemblies — they are not LED. Bulbs are not included; reuse the factory halogen bulbs if they are still good. The housings use the factory 3-hole mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2018 | Chevrolet Silverado 1500 | 3-hole halogen housing only; not factory LED |
| 2019 | Chevrolet Silverado 1500 LD | 3-hole halogen housing only; not 2019+ 1500 (T1XX) |
| 2015-2019 | Chevrolet Silverado 2500 HD | 3-hole halogen housing only; not factory LED |
| 2015-2019 | Chevrolet Silverado 3500 HD | 3-hole halogen housing only; not factory LED |
| 2015-2019 | GMC Sierra 3500 HD | Dually models only; 3-hole halogen housing; not factory LED |
Specs
- Sold as: a driver and passenger pair
- Style: chrome housing, red lens, 3-hole mount
- Lighting: halogen tail, brake, turn, and reverse; bulbs not included
- DOT certified
- 12 V
- New aftermarket assemblies
In the Box
- Driver and passenger chrome halogen tail lights
Interchange References
Replaces original-style halogen tails commonly crossed with 23141274, 23141275, 23431875, 23431876, 84288723, 84288722, 84019503, GM2800261, GM2801261, GM2800293, and GM2801293.
Installation: Chevy Silverado 1500 (2014-2018) / HD (2015-2019)
On these trucks the tail light is held by three nuts reached from inside the bedside with the tailgate open. Confirm your housing is the 3-hole style before you start. Professional installation is recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the tailgate. From inside the bed, locate the three nuts on the back of the tail light.
- Unplug the factory connector.
- Remove the three nuts and pull the housing straight back out of the bedside. Do not pry on the lens.
- Transfer your existing halogen bulbs into the new housing if you are reusing them. Seat each bulb fully.
- Set the new housing into the opening, start the three nuts by hand, then tighten them evenly. Plug the factory connector back in until it clicks.
- Repeat on the other side. Reconnect the battery and check tail, brake, turn, and reverse functions before you drive.