Clear LED Fog Lights Pair w/ Black Bezels for Ford Fusion (2019-2020)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New clear-lens LED fog light pair with gloss-black bezels for the 2019-2020 Ford Fusion. Replaces OEM KS7Z15200B / KS7Z15201B fog lamps and KS7Z17B614CC / KS7Z17B614CD bezels. Includes a wiring harness, relay and switch per the listing.
Fitment
| Year | Make / Model | Notes |
|---|---|---|
| 2019-2020 | Ford / Fusion | LED fog lights with black bezels and wiring |
Will NOT fit: 2013-2018 Fusion (different bezel shape), or other Ford models.
Specs
- Light type: LED (bulbs built in), 12 V, 3 W (per listing)
- Light color: Cold white
- Lens: Clear; bezel: gloss black, painted plastic
- Mounting: Screw-on
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
Fog lamps: KS7Z15200B, KS7Z15201B · Bezels: KS7Z17B614CC, KS7Z17B614CD · Partslink: FO2593252, FO2592252
What's in the Box
- Left and right LED fog lamps
- Left and right black bezels
- Wiring harness, relay and switch
Installation (2019-2020 Ford Fusion)
Tools: trim tool, T25 Torx and 7 mm / 10 mm sockets, floor jack and jack stands.
- Raise and support the front of the car. Remove the lower splash shield under the radiator and pull back the front of the wheel-well liner on the side you are working on.
- Release the fog lamp bezel from the bumper cover with a trim tool, working the clips loose from the outer edge.
- Reach behind the bumper, unplug the fog lamp connector and remove the screws holding the lamp, then take it out. If you cannot reach the screws, loosen the bumper cover edge at the wheel well and pull it out slightly.
- Install the new LED lamp with the screws, then snap the new black bezel into the bumper cover.
- If your Fusion did not have factory fog lights, route the included harness, relay and switch and connect it to a fused 12 V source per the kit. On cars with factory fog lights, connect to the factory fog lamp plug if it matches.
- Test the fog lights, adjust the aim, then refit the liner and splash shield.
Steps based on the Ford Fusion workshop manual "Front Fog Lamp Removal and Installation" (417-01), the 1A Auto 2013-2020 Ford Fusion fog light and fog light bezel videos, and r/fordfusion owner notes.
FAQ
Do these fit a 2017 or 2018 Fusion?
No. The 2019 refresh changed the fog light bezel. This set is listed for 2019-2020 only.
Can I replace just the cracked lens?
No. The lens is sealed to the fog lamp, so the whole lamp is replaced. This kit includes both lamps and bezels.
Do I need to buy bulbs?
No. The LEDs are built in.
Is a wiring kit included?
Yes. A harness, relay and switch are included per the listing, useful for Fusions that came without fog lights.
Do I have to remove the front bumper?
Usually not fully. The bezel pops off from the front and the lamp comes out from behind the bumper. Some owners loosen the bumper corner for room.