GENSSI hero — clear lens tail lights 4pc Lexus IS300 IS200 (2001-2005) white background

Clear Lens Tail Lights 4pc for Lexus IS300 / IS200 (2001-2005)

$419.95
Skip to product information
GENSSI hero — clear lens tail lights 4pc Lexus IS300 IS200 (2001-2005) white background

Clear Lens Tail Lights 4pc for Lexus IS300 / IS200 (2001-2005)

$419.95
DS-IS300-IS200-TAIL-CLR-4PC-2001-2005

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Stock JCE10 reds look dated next to a full clear rear—this 4pc set brightens the 2001-2005 IS300 / IS200 night signature. GENSSI's Lexus IS kit is a vehicle-specific outer+inner clear set that bolts in and plugs into the factory harness.

Important Fitment Note: Fits 2001-2005 Lexus IS300 / IS200 JCE10 sedan only—not 2nd-gen IS (2006+) or later XE30 tails.

Fitment

YEAR MAKE / MODEL FITS
2001-2005 Lexus / IS300 / IS200 JCE10 Sedan Yes

Specs

  • Style: Chrome housing, all-clear lens (outer + inner)
  • Bulbs: Incandescent — reuse factory bulbs or install matching clear/color bulbs as equipped
  • Sold as: Clear lens 4pc outer + inner tail light set
  • Fit: Direct-fit clear 4pc tails for 2001-2005 Lexus IS300 / IS200 JCE10 sedan

Interchange

81550-53032-B0, 81561-53032-B1, 81561-53032-B0, 81560-53070-B0, 81560-53150-B0, 81560-53100-B0, 81591-53011, 81560-53032-B0, 81551-53032-B1, 81551-53032-B0, 81550-53070-B0, 81550-53150-B0, 81550-53100-B0, 81581-53011

What's included

  • 1x Driver outer clear tail light
  • 1x Passenger outer clear tail light
  • 1x Driver inner clear tail light
  • 1x Passenger inner clear tail light

Installation — Lexus IS300 / IS200 JCE10 (2001-2005)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Open the trunk. Pull back the rear side and deck trim to reach the outer and inner tail light fasteners and harness connectors.
  3. Disconnect each harness. Remove the mounting fasteners and slide the factory outer and inner assemblies straight back out of the body openings.
  4. Transfer bulbs from the factory lamps into the new clear housings as needed. Seat each new assembly, reconnect the plugs, and snug the fasteners while checking quarter-panel and deck gaps.
  5. Refit the trunk trim, reconnect the battery, and test parking, brake, turn, and reverse on both sides.

Buyer FAQ

Will these fit a 2006+ IS250/IS350? No. Fitment is 2001-2005 JCE10 IS300 / IS200 sedan only—not 2nd-gen or later IS tails.

Is this outer and inner? Yes. Four assemblies—left/right outer plus left/right inner—replace the full JCE10 rear cluster set.

Do I splice wiring? No. After trunk access, the assemblies bolt in and plug into the factory harness.

You may also like