GENSSI hero — crystal clear red LED tail lights Toyota 4Runner (1996-2002) white background

Crystal Clear Red LED Tail Lights for Toyota 4Runner (1996-2002)

$244.95
Skip to product information
GENSSI hero — crystal clear red LED tail lights Toyota 4Runner (1996-2002) white background

Crystal Clear Red LED Tail Lights for Toyota 4Runner (1996-2002)

$244.95
DS-4RUNNER-N180-TAIL-CRYSTAL-CLR-RED-LED-1996-2002

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Stock N180 reds look soft next to crystal clear red LED punch—this pair brightens the 1996-2002 4Runner rear. GENSSI's Toyota 4Runner kit is a vehicle-specific clear red LED pair that bolts in and plugs into the factory harness.

Fitment

YEAR MAKE / MODEL FITS
1996-2002 Toyota / 4Runner N180 (2WD & 4WD) Yes

Specs

  • Style: Chrome housing, crystal clear lens with red LED sections
  • Bulbs: LED / Incandescent — 7440 / 921 sockets as equipped
  • Sold as: Crystal clear red LED tail light pair
  • Fit: Direct-fit crystal clear red LED tails for 1996-2002 Toyota 4Runner 2WD & 4WD

Interchange

81560-35200, TO2800137, 81550-35200, TO2801137

What's included

  • 1x Driver crystal clear red LED tail light
  • 1x Passenger crystal clear red LED tail light

Installation — Toyota 4Runner N180 (1996-2002)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Open the rear hatch. Pull back the rear side trim to reach the tail light mounting nuts and harness connectors on each quarter.
  3. Disconnect each harness. Remove the mounting nuts and slide the factory left and right assemblies straight back out of the body openings.
  4. Seat each new crystal clear red LED assembly, reconnect the plugs, and snug the fasteners while checking quarter-panel and hatch gaps.
  5. Refit the trim, reconnect the battery, and test parking, brake, turn, and reverse on both sides.

Buyer FAQ

Will these fit 2003-2009 4Runner? No. Fitment is 3rd-gen N180 1996-2002 only—not 4th-gen tails.

Is the clear a film? No. These are crystal clear lens assemblies with red LED sections—not stick-on covers.

Do I splice wiring? No. After hatch access, the assemblies bolt in and plug into the factory harness.

You may also like