Dual LED Headlight for Harley Road Glide Black

This high performance Dual LED Headlamp will update the look of your Harley Road Glide and improve your night vision on the road.

Sleek black housing, PMMA front shatterproof lens with 6 separate light emitters in each lamp section. A total of 12 Lamp emitters.

The output is simply incredible!

• Fits Harley Road Glide Headlamp with black backplate 2004-2013
• May also fit 1998-2003 Road Glide (minor adjustments/modification maybe needed)
• 6x LED Projector Low Beams and 6x LED Projector High Beams
• Includes unpainted bezel which snaps into your current fairing
• Bezel comes in the black primer finish, can be used as is or painted to custom color
• Center Lamps are Chrome

• LED provides greater contrast for improved visibility and safer driving.
• Best-in-class optical design for extended driving pleasure.
• Improved beam pattern with nice cut-off point (see images)
• Basic mounting hardware is included as shown in pictures
• Professional installation is recommended

This high performance Dual LED Headlamp will update the look of your Harley Road Glide and improve your night vision on the road. Sleek black housing, PMMA front shatterproof lens with 6 separate light emitters in each lamp section. A total of 12 Lamp emitters. The output is simply incredible.

Fits '2004-'2013 Road Glide Models.

Installation Tips:

Adjustment screws are much longer than stock. Use the bolts from the stock headlights, once installed the lights were already adjusted per the HD manual.

Use zip ties to make sure the power connector doesn't get loose.

Installation

1. Park the bike on a stand, turn the ignition off, and disconnect the negative battery cable if your service manual calls for it.
2. Remove the headlight trim ring or bucket screws and pull the old headlight out of the bucket.
3. Unplug the headlight connector from the harness.
4. Plug the new LED headlight into the harness (use an adapter if your bike needs one) and test high/low beam before final assembly.
5. Seat the new headlight in the bucket and reinstall the trim ring and screws.
6. Reconnect the battery, check all functions, then aim the headlight so the beam does not blind oncoming traffic.

Some bikes may need a load resistor or anti-flicker adapter; check your model before install. Professional installation is recommended if you are unsure.