GENSSI hero — euro black clear halogen headlights pair Mitsubishi Eclipse (2006-2012) white background

Euro Black Clear Halogen Headlights Pair for Mitsubishi Eclipse (2006-2012)

$251.95
Skip to product information
GENSSI hero — euro black clear halogen headlights pair Mitsubishi Eclipse (2006-2012) white background

Euro Black Clear Halogen Headlights Pair for Mitsubishi Eclipse (2006-2012)

$251.95
DS-ECLIPSE-HEAD-EURO-BLK-CLEAR-2006-2012

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Stock Eclipse chrome projectors age yellow and flat—euro black clear housings bring back a sharp, modern front end. GENSSI's vehicle-specific halogen pair for 2006-2012 Mitsubishi Eclipse bolts in after bumper removal and plugs into the factory H13 harness.

Important Fitment Note: These are halogen H13 assemblies for factory halogen 2006-2012 Mitsubishi Eclipse models. They will not replace factory HID/D1S projector headlights—confirm your car uses halogen H13 bulbs before ordering.

Fitment

YEAR MAKE / MODEL FITS
2006-2012 Mitsubishi / Eclipse Yes

Specs

  • Style: Euro black housing, clear lens
  • Bulbs: H13 high/low, 3457A parking/signal — not included
  • Sold as: Driver and passenger pair
  • Fit: Direct replacement, plugs into factory connectors

Interchange

8301A507, 8301A508, 8301B137, 8301B138, 8301B135, 8301B136, MI2502138, MI2503138, MI2502147, MI2503147, MI2502159, MI2503159

What's included

  • 1 × driver-side (left) headlight assembly
  • 1 × passenger-side (right) headlight assembly

Installation — Mitsubishi Eclipse (2006-2012)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable. Confirm your car uses halogen H13 bulbs—not factory HID.
  2. Remove the front bumper cover: take out the upper bumper screws/clips, underbody fasteners, and the bolts/screws in each front wheel well, then pull the cover forward (disconnect fog lights if equipped).
  3. Disconnect the headlight electrical connector. Remove the three headlight mounting bolts (typically two upper and one lower).
  4. Lift the front of the assembly to free the lower locating peg, then pull the lamp out of the fender opening.
  5. Transfer your H13 and 3457A bulbs/sockets into the new housing without touching halogen glass. Seat dust covers fully.
  6. Install the new assembly, tighten the three bolts, reconnect the harness, and test low beam, high beam, and turn signal before refitting the bumper cover.
  7. Reinstall the bumper cover in reverse order, reconnect the battery, and aim the headlights on a level surface.

Buyer FAQ

Will these work on factory HID Eclipse headlights? No. This pair is built for factory halogen H13 cars only. Factory HID/D1S housings are a different system.

Do I need to cut the harness? No. On halogen cars, the assemblies plug into the factory connectors.

What's in the box? Driver and passenger euro black clear headlight assemblies. H13 and 3457A bulbs are not included.

You may also like