Full LED Headlights Pair w/o Auto Leveling for Dodge Durango (2021-2026)
$436.95
Skip to product information
Full LED Headlights Pair w/o Auto Leveling for Dodge Durango (2021-2026)
$436.95
DS-68433782AE
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy headlights on your 2021-2026 Durango with this brand-new full LED pair with LED module and LED turn signal, for models without auto-leveling.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2021-2026 | Dodge Durango with factory full LED headlights (LED turn signal, 7-pin), without auto-leveling | Factory LED headlights |
Will NOT fit: Auto-leveling/AFS models; LED-with-halogen-turn (8-pin) lamps; 2014-2020 Durango.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- Auto-leveling: No
- LED module: included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 68433782AE. Partslink: CH2503345, CH2502345.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- LED module included
Installation
- Open the hood, remove the hood seal, the side closeout panels and the upper grille clips.
- Remove the fascia fasteners and rivets on both sides, the wheel-arch moldings and the lower fasteners; disconnect the fascia harnesses and release the fascia from the headlamp brackets and fender clips.
- Remove the two 10 mm bolts under the lamp and the two through the fender bracket, unplug the harnesses, remove the hood-seal section and corner sight shield, then the final top bolt.
- Install the new lamp, reconnect, reinstall the fascia and aim the headlights.
Steps compiled from DodgeDurango.net "21-23 bumper-front removal" (Mopar procedure PDF); YouTube "How To EASILY Remove Dodge Durango Headlight 2011-2025"; Go-Parts Durango headlight guide. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a Durango with halogen turn signals?
No. Full LED (7-pin) lamps only.
Will these fit an auto-leveling Durango?
No. Choose the auto-leveling version.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper fascia has to come off to reach the headlamp bolts. Plan on 1-2 hours with a helper.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.