Halogen Headlights Pair for Ford Taurus (2000-2007)

Give a 2000-2007 Taurus a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on standard Taurus models with clear-lens assemblies and amber reflectors that use the factory 9007 bulb and the factory connector. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style housing, clear lens, amber reflector
• Lighting: halogen, 9007 bulb type
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: 9007.

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly

Interchange References

Replaces the original halogen housings used under 1F1Z13008AB / 1F1Z 13008 AB (driver) and 1F1Z13008AA / 1F1Z 13008 AA (passenger), and Partslink FO2502169 / FO2503169. This is not the Centennial Edition housing (FO2502206 / FO2503206).

Installation: Ford Taurus (2000-2007)

On the 2000-2007 Taurus, the headlights typically come out from under the hood. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood. Remove the fasteners along the top of each headlight. If a lower fastener is hidden by the bumper corner, loosen that corner so you can reach it.
2. Pull the assembly forward and unplug the factory connector. Do not pull on the wiring. Transfer your existing 9007 bulbs into the new housings, or install new 9007 bulbs.
3. Connect the factory-style connector, seat each assembly, and start the fasteners. Repeat on the other side.
4. Reinstall any bumper-corner fasteners, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
2000-2007 Ford Taurus with the standard halogen housing (FO2502169 / FO2503169). They will not fit Taurus Centennial Edition models that use a different housing, or 2008-up Taurus. Compare your current lamps with our photos before ordering.

Will they fit a Taurus Centennial Edition?
No. Centennial Edition Taurus uses a different housing. This pair is the standard FO2502169 / FO2503169 halogen lamp.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

What bulb do they use?
These housings use a 9007 halogen bulb. Transfer your existing bulbs or have new 9007 bulbs ready before you install.

How are they installed on a 2000-2007 Taurus?
On this generation, the assemblies typically come out from under the hood. Remove the fasteners along the top of each housing; if a lower fastener is hidden by the bumper corner, loosen that corner first. Unplug the factory connector, transfer or install 9007 bulbs, reconnect, and aim the lamps before nighttime driving.