Halogen Headlights Pair for Toyota Sequoia (2001-2004) and 2004 Tundra Double Cab
$116.95
Skip to product information
Halogen Headlights Pair for Toyota Sequoia (2001-2004) and 2004 Tundra Double Cab
$116.95
DS-81150-0C020
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 2001-2004 Toyota Sequoia and 2004 Toyota Tundra Double Cab only. They will not fit 2000-2004 Tundra Regular Cab or Access Cab, which use a different housing, or 2005-up Sequoia or Tundra. H4 halogen bulbs are included.
Give a 2001-2004 Toyota Sequoia, or a 2004 Tundra Double Cab, a clean factory look again. This original-style halogen pair replaces tired or damaged headlight assemblies on those trucks. Each lamp is CAPA certified and DOT and SAE compliant, and the H4 halogen bulbs come in the box so you can install a complete pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2001-2004 | Toyota Sequoia | First-generation Sequoia, all cabs. |
| 2004 | Toyota Tundra Double Cab | Double Cab only. Will not fit Regular Cab or Access Cab. |
Specs
- Sold as: driver and passenger pair
- Housing / style: original-style halogen housing, clear lens
- Lighting: halogen, with H4 bulbs included
- CAPA certified, DOT and SAE compliant
- New aftermarket assemblies, designed to replace the factory halogen units
Bulb size: H4 (included).
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- H4 halogen bulbs
Interchange References
Replaces the original halogen housings used under 81150-0C020 (driver) and 81110-0C020 (passenger), including 811500C020 and 811100C020, and Partslink TO2502144 / TO2503144.
Installation: Toyota Sequoia (2001-2004) and 2004 Tundra Double Cab
On the 2001-2004 Sequoia and the 2004 Tundra Double Cab, the side marker / park lamp comes out first so you can reach the headlight bolts. You typically do not need to remove the bumper cover. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Remove the Phillips-head clip above the side marker / park lamp, pull that lamp forward, and unplug its connectors. Set it aside.
- Remove the four 10 mm bolts that hold the headlight to the radiator support and fender. Unplug the factory connector from the back of the assembly and lift the housing up and out. Do not pull on the wiring.
- Set the new assembly in the same opening, start the four 10 mm bolts, and connect the factory-style connector. Repeat on the other side.
- Aim the lamps on a level surface, then reconnect and reseat the side marker / park lamp and its Phillips clip. Reconnect the battery and test low beam, high beam, and the side marker / turn function before driving at night.
Frequently Asked Questions
Which vehicles do these headlights fit?
2001-2004 Toyota Sequoia, and 2004 Toyota Tundra Double Cab only. Compare your current lamps with our photos before ordering.
Will they fit a 2000-2004 Tundra Regular Cab or Access Cab?
No. Those trucks use a different headlight housing. This pair is only for 2004 Tundra Double Cab, plus 2001-2004 Sequoia.
Will they fit a 2005-up Sequoia or Tundra?
No. Later Sequoia and Tundra generations use different housings.
Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do they include bulbs?
Yes. H4 halogen bulbs are included for both assemblies.
Are they CAPA certified?
Yes. These assemblies are CAPA certified and DOT and SAE compliant.
How are they installed on a 2001-2004 Sequoia or 2004 Tundra Double Cab?
Remove the side marker / park lamp (Phillips clip), then the four 10 mm headlight bolts. Unplug the factory connector and lift the housing out. Set the new lamp in the same opening, aim the beams, and reinstall the side lamp.