HID Projector Headlights Pair w/ LED DRL for Chevy Traverse (2018-2020)

Replace yellowed or cracked HID headlights on your 2018-2020 Chevrolet Traverse with this brand-new HID projector pair with LED DRL. Reuse your factory D3S bulbs and HID parts.

Fitment

Will NOT fit: Traverse with full LED (High Country/RS); halogen Traverse; 2009-2017 Traverse.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: D3S HID (not included)
• DRL: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84887857, 84721414, 84573719, 84721415, 84887858, 84573720. Partslink: GM2502487, GM2503487.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Headlight housings only
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Disconnect the battery. Remove the upper radiator close-out panel and the screws across the top of the front fascia.
2. Remove the wheel-well liner screws/clips at the front of each liner and the lower fascia screws underneath.
3. Release the fascia from the fender and headlamp brackets, pull it forward and unplug the fascia wiring.
4. Remove the 3-4 headlamp mounting bolts, unplug the lamp and pull it forward. Install the new lamp, refit the fascia and aim the headlights.

Steps compiled from Go-Parts "2018-2024 Traverse Headlight Guide" and GM Parts headlight replacement guide. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Per the item specifics: reuse your factory D3S low-beam bulb and HID kit; bulb, ballast and wires are not included.

Will these fit a Traverse High Country with LED?
No. Full-LED Traverse lamps are a different part.

Do I need to remove the front bumper to replace these headlights?
Yes. On the 2018-2021 Traverse the front fascia must come off to reach the headlamp mounting bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.