OE Style Halogen Projector Headlights Pair for Kia Soul (2014-2016)
$402.95
Skip to product information
OE Style Halogen Projector Headlights Pair for Kia Soul (2014-2016)
$402.95
DS-92102B2050-PROJ
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: Factory HALOGEN PROJECTOR headlights only. Match your original projector housing, not the reflector-style headlight. Bulbs are not included.
OE Style Halogen Projector Headlights Pair for Kia Soul (2014-2016). New driver and passenger replacement assemblies with clear lenses. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2016 | Kia Soul | Factory HALOGEN PROJECTOR headlights only. Match your original projector housing, not the reflector-style headlight. Bulbs are not included. |
Specs
- Sold as: driver and passenger pair
- Lighting: Halogen
- High/low beam H7 halogen projector. Bulbs not included.
- DOT/SAE compliance stated in the product listing
Bulb sizes: H7
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
92102B2050, 92101B2050, KI2503168, KI2502168, KAPKI413001+2
Installation: Kia Soul (2014-2016)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Remove the two 10 mm bolts and one 12 mm headlamp bolt on the 2014-2016 Soul. Unplug the lamp; on the driver side release the diagnostic-plug/harness retainer attached to the housing.
- Use a long trim tool to release the lower locating grommets without prying on the lens. Pull the housing forward and transfer compatible H7 bulbs and the required harness retainers.
- Align all locating pins with their grommets, reconnect the harness and reinstall the original mounting bolts. Confirm the driver-side diagnostic-plug bracket is secure, test both beams and have beam aim checked.
Frequently Asked Questions
Which factory lighting configuration is compatible?
Factory HALOGEN PROJECTOR headlights only. Match your original projector housing, not the reflector-style headlight. Bulbs are not included.
Which bulbs are used and included?
High/low beam H7 halogen projector. Bulbs not included.
What access is needed for installation?
The lamp is released from its lower grommets after removing two 10 mm and one 12 mm bolts. The driver-side diagnostic-plug retainer must also be unclipped. Professional installation and beam aiming are recommended.