Red LED Tail Lights Pair for Chevy / GMC C/K 1500-3500 (1988-1998) / Suburban (1992-1998) / Tahoe Yukon (1995-1999)
$132.95
Skip to product information
Red LED Tail Lights Pair for Chevy / GMC C/K 1500-3500 (1988-1998) / Suburban (1992-1998) / Tahoe Yukon (1995-1999)
$132.95
DS-GM2806101-LED
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Chevrolet and GMC C1500, K1500, C2500, K2500, C3500, and K3500 (1988-1998), Suburban 1500 and Suburban 2500 (1992-1998), and Chevrolet Tahoe / GMC Yukon (1995-1999) only. They will not fit Cadillac Escalade, 1999 C/K trucks, 2000 Tahoe, or Blazer, which use different housings. Compare your current lamps with our photos before ordering.
Replace the GMT400 tails with this red-lens LED pair. You get driver and passenger assemblies with LED tail, brake, and turn lighting. A reverse bulb is not included — reuse your factory reverse bulb. The housings use the factory mounting points and factory-style connectors.
Installation for 1988-1998 C/K, 1992-1998 Suburban, and 1995-1999 Tahoe / Yukon
- On trucks, lower or remove the tailgate so you can reach the screws that hold the housing to the bed opening. On Suburban, Tahoe, and Yukon, open the rear doors or liftgate and reach the housing fasteners from inside.
- Remove the screws or nuts and pull the housing straight back.
- Unplug the factory connector. Transfer the factory reverse bulb to the new housing.
- Plug the new housing into the factory-style connector, seat it in the opening, and tighten the fasteners.
- Repeat on the other side, then check tail, brake, turn, and reverse functions.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.