RGB LED Tail Lights Set for Honda Accord Sedan (2018-2022)

The 2018-2022 Accord sedan already has a wide, low rear end. This RGB LED set leans into that — a color-changing light bar that runs across the outers and the trunk inners, a sequential amber turn, and app-controlled RGB modes in the 10th-generation opening.

Features

• RGB LED 4-piece set with a sequential turn. Color-changing running lights, a sequential amber turn, brake, and reverse are built into the housings, with app control for the RGB modes as shown in the photos.
• Built for the 2018-2022 Accord sedan. On-car fitment is the 10th-generation sedan rear, including the trunk inners. It does not fit 2013-2017 or 2023 and later Accords.
• Smoked housings with a sealed LED layout. The set uses a sealed assembly with DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete 4-piece set. You get both outer (quarter) lamps and both inner (trunk) lamps. Professional installation is recommended.

Signs It's Time to Upgrade Your Tail Lights

• The factory 2018-2022 Accord tails have dulled, and the rear no longer looks as sharp as the rest of the sedan.
• You want color-changing RGB running lights and a sequential turn that run across the trunk.
• You confirmed your car is a 2018-2022 Accord sedan, not a 2013-2017 or 2023 or later Accord.
• You want the complete 4-piece set, not an outer-only pair.

Why Drivers Love This RGB Set

• The RGB bar and sequential turn give the 2018-2022 Accord sedan a night-drive look the factory lamps never had.
• The housings are shaped for the 10th-generation sedan opening, so the outers and trunk inners line up as one signature.
• We ship a complete 4-piece set with running, brake, turn, and reverse functions in the housings.
• A 1-year warranty stands behind the set.

Specifications

• Fitment: 2018-2022 Honda Accord sedan (does not fit 2013-2017 or 2023 and later)
• Lighting: Full LED, RGB running light, sequential turn signal
• Functions: Running light, brake, turn signal, reverse
• Housing / lens: Black housing, smoked lens
• Voltage: 12V
• Certifications: DOT, ISO, SAE as documented for this set
• Warranty: 1 year
• Sold as: Set of 4 (left and right outers plus left and right trunk inners)

What's in the box

• Driver-side (left) outer tail light assembly
• Passenger-side (right) outer tail light assembly
• Driver-side (left) trunk / inner tail light assembly
• Passenger-side (right) trunk / inner tail light assembly

Installation on the 2018-2022 Honda Accord sedan

Work from the trunk. Disconnect the battery. On the 2018-2022 Accord sedan, pull back the trunk side trim on each side to reach the nuts that hold the outer tail lights, and open the trunk-lid access covers for the inner lamps. Unplug each harness, remove the fasteners, and lift the four housings out of the quarter and trunk openings. Set the new outers and inners in place, reconnect, and test running lights, brake, turn signals, reverse, and the RGB modes before the trim goes back on. Professional installation is recommended.

FAQ

Is this a pair or a complete set?
This is a complete 4-piece set: both outer (quarter) lamps and both inner (trunk) lamps. It is not an outer-only pair.

Will this fit a 2013-2017 or a 2023 or later Accord?
No. This set is for the 2018-2022 Honda Accord sedan (10th generation) only.

Does this fit an Accord coupe?
No. The 10th-generation Accord was a sedan only. This set is for the 2018-2022 Accord sedan.

What warranty do we include?
These tail lights are covered by a 1-year warranty.