Xenon HID Ballast 130732929602 for Mercedes-Benz S-Class W221 & CL-Class C216 (2010-2014)

New D1S xenon HID headlight ballast for Mercedes-Benz, a direct replacement for AL 130732929602 (Mercedes A2169009100), for 2010-2014 S-Class W221 and CL-Class C216 with factory xenon headlights. Replacement unit for Mercedes-Benz, not a Genuine Mercedes-Benz part. Free shipping to the lower 48.

Fix a Dark or Flickering Xenon Headlight

This ballast (listed by the seller as a xenon ballast with range adjustment) powers the factory D1S xenon headlight. When it fails the headlight can go dark, flicker or cut out.

Fits

Fits vehicles with the factory Xenon headlamp. Match the part number on your old module before ordering.

OEM / Interchange Part Numbers

• AL 130732929602 / 1 307 329 296 02
• A2169009100 / A 216 900 91 00
• A2169012400
• A2169022600
• A2169009000
• A2219000701
• 10EEG100886

Common Signs of a Failed Module

• Headlight goes out after a few seconds or minutes
• Headlight flickers or cycles on and off
• One headlight dead while the bulb is good
• Headlight color shifts or the lamp won't strike

Specs

• Brand: replacement for Mercedes-Benz (not Genuine OEM)
• Lighting technology: Xenon HID, D1S bulb
• Placement: front left or right headlight
• Sold as one unit, new
• Seller warranty: 2 years

What's Included

• 1 x xenon HID ballast 130732929602 (replacement, no bulb)

Installation

1. Turn the headlights and ignition off and disconnect the negative battery cable. Let the bulb and ballast cool.
2. On the Mercedes-Benz S-Class W221 / CL-Class C216 the ballast is mounted to the bottom or back of the headlamp housing. Depending on the vehicle you may reach it through the wheel-well liner, or you may need to loosen the bumper cover and unbolt the headlamp to pull it forward.
3. Unplug the main power connector and the igniter/bulb lead, then remove the screws holding the ballast to the housing.
4. Compare the part number on your old ballast to the numbers above before fitting the new one.
5. Fit the new ballast, refit its screws and lock every connector fully. The seller lists it as a direct replacement with no modification needed.
6. Reinstall the headlamp and trim, reconnect the battery and test low beam (and high beam if bi-xenon).

FAQ

Is this a Genuine Mercedes-Benz part?
No. It is a new replacement built to fit in place of AL 130732929602 / Mercedes A2169009100.

Is this the same as A2048700126?
No. This is the AL 130732929602 / A2169009100 version. Match the label on your old ballast before ordering.

Is shipping free?
Yes, shipping is free to the lower 48 US states.