Transform Your Jeep's Night Vision with XPE Honeycomb LED Projectors
Say goodbye to dim, hazy night drives and hello to a rugged, modern aesthetic. These XPE Honeycomb Black Projector Headlights with DRL are designed to not only dramatically improve your visibility on any trail or road but also to give your classic XJ or YJ a bold, distinctive look that commands attention. Light up your adventures like never before.
Why You Need This
-
Superior Illumination: Experience significantly brighter and whiter light output compared to stock halogen bulbs, enhancing your ability to see road markings, signs, and obstacles.
-
Reduced Glare, Safer Driving: The advanced projector lens design cuts off glare, directing light precisely onto the road and minimizing discomfort for oncoming drivers.
-
Modern DRL Functionality: Integrate stylish side DRL strips to enhance your Jeep's daytime presence and add a unique visual flair (requires simple wiring).
-
Enhanced Durability & Longevity: Built with an aluminum alloy housing for effective heat dissipation and an impressive lifespan of up to 30,000 hours, ensuring reliable performance for years to come.
Technical Specifications
| Part Numbers |
XPE-HCLP-XJYJ-BLK |
| Fitment |
Jeep Cherokee XJ: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Jeep Wrangler YJ: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
|
| Specs |
Low Beam: 35W, <3000 Lumens
High Beam: 85W, <5500 Lumens
Housing: Aluminum Alloy
Connection: H4 Plug & Play
DRL Function: Requires wiring to a 12V power source (e.g., switch, turn signal, park lamp)
|
At GENSSI, we stand behind the quality and performance of our products. Enjoy the confidence of the GENSSI Promise with every purchase.
Installation
- Park on level ground, turn the engine off, and disconnect the negative battery cable.
- Remove the grille or headlight bezel/trim ring screws (varies by Jeep model) to access the headlight.
- Remove the retaining ring screws, pull the old headlight forward, and unplug it from the harness.
- Plug in the new LED headlight (use the included adapter if one is supplied for your model) and test high/low beam before fully mounting.
- Mount the new headlight with the retaining ring, then reinstall the bezel or grille.
- Reconnect the battery, check all functions (high, low, DRL/halo if equipped), and aim the headlights on a flat wall before night driving.
Some vehicles may need anti-flicker or CANbus decoders to prevent flicker or dash warnings. Professional installation is recommended if you are unsure.
