All-Clear Chrome LED Tail Lights 4pc for Lexus IS250 / IS350 / IS F (2006-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Stock red IS lenses look soft next to a clear blackout rear—all-clear chrome LED tails give the 2IS a brighter crystal signature when parked and on the brakes. GENSSI's 2006-2013 Lexus IS250 / IS350 / IS F 4pc set is vehicle-specific; reuse your 921 reverse bulbs and plug into the factory harness.
Important Fitment Note: Fits 2006-2013 Lexus IS250 / IS350 / IS F 4-door sedan. LED brake/tail/turn are built in. No reverse bulbs are included—reuse your original 921 / T15 clear reverse bulbs.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2006-2013 | Lexus / IS250 / IS350 / IS F | Yes |
Specs
- Style: Chrome housing, all-clear lenses, full LED (brake / tail / turn)
- Bulbs: LED (built-in) — reverse uses factory 921 / T15 clear bulb (not included; reuse OEM)
- Sold as: 4pc LED tail light set (outers + inners)
- Fit: Direct replacement 4pc set — reuse factory 921 reverse bulbs
Interchange
81561-53220, 81561-53171, 81561-53230, 81551-53220, 81551-53171, 81551-53240, 81591-53090, 81591-53061, 81591-53060, 81591-53110, 81581-53090, 81581-53061, 81581-53060
What's included
- 1x Driver outer tail light
- 1x Passenger outer tail light
- 1x Driver inner tail light
- 1x Passenger inner tail light
Installation — Lexus IS250 / IS350 / IS F (2006-2013)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the trunk. Remove the rear trunk side trim / access covers needed to reach the outer and inner tail light nuts and connectors.
- Disconnect each harness plug. Remove the mounting nuts from the outer and inner lamps and carefully pull each assembly straight back.
- Transfer your factory 921 / T15 clear reverse bulbs into the new clear housings. Do not force sockets.
- Seat the new outer and inner LED assemblies, reconnect the plugs, and snug the nuts evenly while checking quarter-panel gaps.
- Refit the trunk trim, reconnect the battery, and test brake, tail, turn, and reverse on both sides.
Buyer FAQ
Are these stick-on clear covers? No. These are full outer and inner LED tail light assemblies for the 2nd-gen IS sedan—not overlays.
Do I need new reverse bulbs? Reuse your factory 921 / T15 clear reverse bulbs. LED functions are built into the housings.
Do I splice the harness? No. The 4pc set plugs into the factory IS connectors after the trunk trim and lamp fasteners are removed.