GENSSI hero — all clear tail lights pair with bulbs for Jeep Liberty (2002-2007) on white

All Clear Tail Lights Pair w/ Bulbs for Jeep Liberty (2002-2007)

$167.95
Ir directamente a la información del producto
GENSSI hero — all clear tail lights pair with bulbs for Jeep Liberty (2002-2007) on white

All Clear Tail Lights Pair w/ Bulbs for Jeep Liberty (2002-2007)

$167.95
DS-LIBERTY-TAIL-ALL-CLR-PAIR-2002-2007

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The KJ Liberty's red and amber lenses date the rear, and this all-clear pair with a chrome housing and a black outer ring cleans that corner up by day while the included color bulbs keep brake, turn, and reverse readable at night. GENSSI's set is a left and right assembly for the 2002-2007 Liberty, and the included harnesses plug into the factory connector with no splicing.

Important Fitment Note: Fits every 2002-2007 Liberty, including Sport, Limited, and Renegade. The 2008-2012 Liberty uses a different tail lamp.

Fitment

YEAR MAKE / MODEL FITS
2002-2007 Jeep / Liberty, all trims Yes
2008-2012 Jeep / Liberty No

Specs

  • Style: Chrome housing with a black outer trim ring and an all-clear lens; polycarbonate lens with UV protection and high impact resistance
  • Bulbs: Incandescent. Bulbs included: 2x 3157 red (park and brake), 2x 3156 amber (turn), and 2x 3156 clear (reverse). A left and right wire harness with sockets is included and plugs into the factory body connector. No splicing
  • Sold as: Pair — left and right tail light assemblies, with bulbs and harnesses
  • Fit: Direct replacement for all 2002-2007 Jeep Liberty trims, including Sport, Limited, and Renegade; harness plugs into the factory connector, no splicing

Interchange

55396459AE, 55396459AF, 55396459AH, 55396458AE, 55396458AF, 55396458AH

What's included

  • 1x Driver (left) all-clear tail light assembly
  • 1x Passenger (right) all-clear tail light assembly
  • 2x 3157 red bulbs
  • 2x 3156 amber bulbs
  • 2x 3156 clear bulbs
  • 2x tail light wire harnesses with sockets

Installation — Jeep Liberty KJ (2002-2007)

  1. Open the tailgate. Remove the two T20 Torx screws that hold the inner edge of the lamp to the plastic nuts in the tailgate jamb. On the passenger side those screws are on the face of the jamb. On the driver side, reach them through the tailgate opening.
  2. Pull the outer side of the lamp rearward to unsnap the two ball studs from the plastic grommets in the quarter panel. If a grommet comes out with the stud, press it back into the quarter panel before the new lamp goes on.
  3. Press the lock tab and unplug the body harness from the socket plate on the old lamp.
  4. This set includes a harness with sockets for each side. Plug that harness into the body connector until the lock clicks. Install the included bulbs in the new sockets: red 3157 in the park and brake socket, amber 3156 in the turn socket, and clear 3156 in the reverse socket. Lock each socket about 30 degrees clockwise in the new housing.
  5. Line the two ball studs up with the grommets and push the outer side until both studs snap in. Install the two T20 screws and tighten them to 20 in-lbs (2 N·m). Do not overtighten the plastic nuts.
  6. Check park, brake, turn, and reverse on that side, then repeat the same two-screw process on the other lamp.

Buyer FAQ

Is this a lens cover over the factory lamp? No. Each side is a full housing with an all-clear lens, a chrome interior, and a black outer trim ring. It replaces the factory lamp.

Do I splice the harness? No. Each side includes a wire harness with sockets. It plugs into the factory body connector. The bulbs in the box are a red 3157, an amber 3156, and a clear 3156 per side.

Which Liberty years are in the box? All 2002-2007 Liberty trims, including Sport, Limited, and Renegade. You get both housings, both harnesses, and the six bulbs. Left side matches 55396459AE, 55396459AF, and 55396459AH. Right side matches 55396458AE, 55396458AF, and 55396458AH. The 2008-2012 Liberty is a different body.

También te puede interesar