Black Amber Corner Halogen Headlights Pair for Chevrolet Equinox (2005-2009)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace your Chevrolet Equinox front lamps with a new driver and passenger pair in black amber corner finish, with clear lenses and amber corner reflectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2005-2009 | Chevrolet Equinox | Black housing with amber corner reflector |
Specs
- Sold as: driver and passenger pair
- Housing/style: Black Amber Corner
- Lighting: Halogen
- High/low beam: 9007; signal: 1156NA; marker: 194.
- Headlight bulbs not included
Bulb sizes: 9007 | 1156NA | 194
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
15888058, 15888059, GM2503254, GM2502254
Installation: 2005-2009 Chevrolet Equinox
Professional installation and beam aiming are recommended. Switch off the ignition and lights before servicing.
- Carefully pry off the grille center bar; its rear plastic clips lock into the headlight edges. Replace any broken edge clips with spares from the middle of the bar.
- Remove the two small upper bolts and the lower 10 mm bolt deep at the side of the lamp (often thread-locked). Lift the rear locking tab, pull the lamp down and out off its lower pivot ball and disconnect the sockets.
- Transfer compatible 9007, 1156-type signal and 194 marker bulbs. Route the wiring below the metal support, seat the lamp, start the upper bolts without overtightening the small fasteners, then install the lower bolt and snap the center bar back on. Test and aim the lamps.
Frequently Asked Questions
Which vehicles do these headlights fit?
Fits 2005-2009 Chevrolet Equinox. Bulbs are not included. This version has black housings and amber corner reflectors, not the clear-corner version.
Which bulbs do these assemblies use?
High/low beam: 9007; signal: 1156NA; marker: 194. Headlight bulbs are not included; transfer compatible serviceable bulbs or buy replacements separately.
What access is needed for installation?
The grille center bar must be unclipped to reach the upper and deep lower headlight bolts. Professional installation and beam aiming are recommended.